EB19E2J2H-32.000M TR (Data Sheet downloaded on Aug 17, 2020) REGULATORY COMPLIANCE 2011/65 + 191 SVHC 2015/863 ITEM DESCRIPTION Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 1.62Vdc to 3.63Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD) 32.000MHz 25ppm over -40C to +85C ELECTRICAL SPECIFICATIONS Nominal Frequency 32.000MHz Frequency Tolerance/Stability 25ppm Maximum over -40C to +85C (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration) Supply Voltage 1.62Vdc to 3.63Vdc Input Current 4mA Maximum Output Voltage Logic High (Voh) 90% of Vdd Minimum (IOH= -4mA) Output Voltage Logic Low (Vol) 10% of Vdd Maximum (IOL= +4mA) Rise/Fall Time 4nSec Maximum (Measured at 20% to 80% of waveform) Duty Cycle 50 5(%) (Measured at 50% of waveform) Load Drive Capability 15pF Maximum Output Logic Type CMOS Pin 1 Connection Tri-State (High Impedance) Tri-State Input Voltage (Vih and Vil) 80% of Vdd Minimum or No Connect to Enable Output, 20% of Vdd Maximum to Disable Output (High Impedance) Standby Current 10A Maximum (Disabled Output: High Impedance) RMS Phase Jitter 1pSec Maximum (Fj = 12kHz to 20MHz) Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V Fine Leak Test MIL-STD-883, Method 1014, Condition A Flammability UL94-V0 Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-883, Method 2002, Condition B Moisture Resistance MIL-STD-883, Method 1004 Moisture Sensitivity J-STD-020, MSL 1 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010, Condition B Vibration MIL-STD-883, Method 2007, Condition A www.ecliptek.com Specification Subject to Change Without Notice Revision A 09/29/2017 Page 1 of 7 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EB19E2J2H-32.000M TR MECHANICAL DIMENSIONS (all dimensions in millimeters) PIN CONNECTION 2.50 1 Tri-State 0.75 0.10 0.15 2 Case/Ground 3 Output 1.00 2 3 4 Supply Voltage 0.10 LINE MARKING 3.20 1.20 1 E32.0 0.15 0.10 E=Ecliptek Designator 2 XXXXX XXXXX=Ecliptek 1 4 Manufacturing Identifier 1.00 0.90 0.20 0.10 Suggested Solder Pad Layout All Dimensions in Millimeters 1.10 (X4) 1.30 (X4) Solder Land 1.00 (X4) 0.80 All Tolerances are 0.1 www.ecliptek.com Specification Subject to Change Without Notice Revision A 09/29/2017 Page 2 of 7 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200 MARKING ORIENTATION