EB19E2J2H-48.000M TR Abracon

EB19E2 Series REGULATORY COMPLIANCE 2011/65 + 191 SVHC 2015/863 ITEM DESCRIPTION Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 1.62Vdc to 3.63 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount ELECTRICAL SPECIFICATIONS Nominal Frequency 1MHz to 50MHz Frequency Tolerance/Stability Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration 100ppm Maximum over -20C to +70C 50ppm Maximum over -20C to +70C 25ppm Maximum over -20C to +70C 20ppm Maximum over -20C to +70C 100ppm Maximum over -40C to +85C 50ppm Maximum over -40C to +85C 25ppm Maximum over -40C to +85C Supply Voltage 1.62Vdc to 3.63Vdc Input Current 3.0mA Maximum over Nominal Frequency of 1MHz to 9.999999MHz 4.0mA Maximum over Nominal Frequency of 10MHz to 39.999999MHz 5.0mA Maximum over Nominal Frequency of 40MHz to 50MHz Output Voltage Logic High (V ) IOH= -4mA OH 90% of Vdd Minimum Output Voltage Logic Low (V ) IOL= +4mA OL 10% of Vdd Maximum Rise/Fall Time Measured at 20% to 80% of waveform 5nSec Maximum over Nominal Frequency of 1MHz to 24MHz 4nSec Maximum over Nominal Frequency of 24.000001MHz to 50MHz Duty Cycle Measured at 50% of waveform 50 5(%) Load Drive Capability 15pF Maximum Output Logic Type CMOS Pin 1 Connection Tri-State (High Impedance) Tri-State Input Voltage (Vih and Vil) 80% of Vdd Minimum or No Connect to Enable Output, 20% of Vdd Maximum to Disable Output (High Impedance) Standby Current 10A Maximum RMS Phase Jitter Fj = 12kHz to 20MHz 1pSec Maximum Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C Revised A: 9/29/2017 Page 1 of 8 www.ecliptek.com EB19E2 Series PART NUMBERING GUIDE Revised A: 9/29/2017 Page 2 of 8 www.ecliptek.com