EBRA23 Series REGULATORY COMPLIANCE 2011/65 + 191 SVHC 2015/863 ITEM DESCRIPTION Automotive Grade Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD) ELECTRICAL SPECIFICATIONS Nominal Frequency 1.000MHz to 156.250MHz Frequency Tolerance/Stability Inclusive of all conditions: Calibration Tolerance (at 25C), Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, and First Year Aging at 25C 100ppm Maximum over -40C to +85C 50ppm Maximum over -40C to +85C 25ppm Maximum over -40C to +85C 100ppm Maximum over -40C to +105C 50ppm Maximum over -40C to +105C 100ppm Maximum over -40C to +125C 50ppm Maximum over -40C to +125C Aging at 25C 3ppm/year Maximum Supply Voltage 3.3Vdc 10% Input Current Unloaded 10mA Maximum (1 to 60MHz) 25mA Maximum (60.001 to 156.250MHz) Output Voltage Logic High (Voh) IOH = -4mA 90% of Vdd Minimum Output Voltage Logic Low (Vol) IOL = +4mA 10% of Vdd Maximum Rise/Fall Time Measured at 20% to 80% of Waveform 6nSec Maximum Duty Cycle Measured at 50% of Waveform 50 10(%) 50 5(%) Load Drive Capability 15pF Maximum Output Logic Type CMOS Pin 1 Connection Tri-State (High Impedance) Output Control Input Voltage Logic 70% of Vdd Minimum or No C High (Vih) onnect to Enable Output Output Control Input Voltage Logic 30% of Vdd Maximum to Disable Output (High Impedance) Low (Vil) Standby Current Without Load 10A Maximum Period Jitter (RMS) 5pSec Maximum Period Jitter (pk-pk) 30pSec Maximum Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C Revised A: 10/19/2018 Page 1 of 8 www.ecliptek.com EBRA23 Series PART NUMBERING GUIDE ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V Fine Leak Test MIL-STD-883, Method 1014, Condition A Flammability UL94-V0 Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-883, Method 2002, Condition B Moisture Resistance MIL-STD-883, Method 1004 Moisture Sensitivity J-STD-020, MSL 1 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010, Condition B Vibration MIL-STD-883, Method 2007, Condition A Revised A: 10/19/2018 Page 2 of 8 www.ecliptek.com