EBRA33T2H-28.63636M (Data Sheet downloaded on Dec 6, 2018) REGULATORY COMPLIANCE 2011/65 + 191 SVHC 2015/863 ITEM DESCRIPTION Automotive Grade Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 2.5mm x 3.2mm Ceramic Surface Mount (SMD) 28.63636MHz 50ppm over -40C to +125C ELECTRICAL SPECIFICATIONS Nominal Frequency 28.63636MHz Frequency Tolerance/Stability 50ppm Maximum over -40C to +125C (Inclusive of all conditions: Calibration Tolerance (at 25C), Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, and First Year Aging at 25C) Aging at 25C 3ppm/year Maximum Supply Voltage 3.3Vdc 10% Input Current 10mA Maximum (Unloaded) Output Voltage Logic High (Voh) 90% of Vdd Minimum (IOH = -4mA) Output Voltage Logic Low (Vol) 10% of Vdd Maximum (IOL = +4mA) Rise/Fall Time 6nSec Maximum (Measured at 20% to 80% of Waveform) Duty Cycle 50 5(%) (Measured at 50% of Waveform) Load Drive Capability 15pF Maximum Output Logic Type CMOS Pin 1 Connection Tri-State (High Impedance) Output Control Input Voltage Logic 70% of Vdd Minimum or No Connect to Enable Output High (Vih) Output Control Input Voltage Logic 30% of Vdd Maximum to Disable Output (High Impedance) Low (Vil) Standby Current 10A Maximum (Without Load) Period Jitter (RMS) 5pSec Maximum Period Jitter (pk-pk) 30pSec Maximum Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V Fine Leak Test MIL-STD-883, Method 1014, Condition A Flammability UL94-V0 Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-883, Method 2002, Condition B Moisture Resistance MIL-STD-883, Method 1004 Moisture Sensitivity J-STD-020, MSL 1 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010, Condition B Vibration MIL-STD-883, Method 2007, Condition A www.ecliptek.com Specification Subject to Change Without Notice Revision A 10/19/2018 Page 1 of 6 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EBRA33T2H-28.63636M MECHANICAL DIMENSIONS (all dimensions in millimeters) PIN CONNECTION 1 Tri-State 2.50 0.75 0.10 (X4) 1.10 0.15 2 Case/Ground MAX 3 Output 3 2 4 Supply Voltage 3.20 1.20 LINE MARKING 1.00 0.15 0.10 1 28.63 0.10 2 XXX 1 4 XXX=Ecliptek Manufacturing Identifier 1.00 0.10 Seam Sealed Terminal Plating Thickness: Gold (0.3 to 1.0m) over Nickel (1.27 to 8.89m). Suggested Solder Pad Layout All Dimensions in Millimeters 1.10 (X4) 1.30 (X4) Solder Land 1.00 (X4) 0.80 All Tolerances are 0.1 www.ecliptek.com Specification Subject to Change Without Notice Revision A 10/19/2018 Page 2 of 6 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200 MARKING ORIENTATION