R PART NUMBER DATA SHEET ECLIPTEK CORPORATION EC1345HSETTTS-25.000M-G ITEM DESCRIPTION 25.000MHz 50ppm -40C to +85C ELECTRICAL SPECIFICATIONS Nominal Frequency 25.000MHz Frequency Tolerance/Stability 50ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration) Aging at 25C 5ppm/year Maximum Operating Temperature Range -40C to +85C Supply Voltage 3.3Vdc 10% Input Current 25mA Maximum Output Voltage Logic High (Voh) 2.4Vdc Minimum with TTL Load, 2.7Vdc Minimum with LVCMOS Load Output Voltage Logic Low (Vol) 0.4Vdc Maximum with TTL Load or 0.5Vdc Maximum with LVCMOS Load Rise/Fall Time 6nSec Maximum (10% to 90% of waveform) Duty Cycle 50 5(%) (Measured at 50% of waveform) Load Drive Capability 15pF LVCMOS Load Maximum Output Logic Type CMOS Pin 1 Connection Tri-State (High Impedance) Tri-State Input Voltage (Vih and Vil) +2.2Vdc Minimum to enable output, +0.8Vdc Maximum to disable output (High Impedance), No Connect to enable output. Absolute Clock Jitter 100pSec Maximum One Sigma Clock Period Jitter 25pSec Maximum Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C ENVIRONMENTAL & MECHANICAL SPECIFICATIONS Fine Leak Test MIL-STD-883, Method 1014, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Lead Integrity MIL-STD-883, Method 2004 Mechanical Shock MIL-STD-202, Method 213, Condition C Resistance to Soldering Heat MIL-STD-202, Method 210 Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010 Vibration MIL-STD-883, Method 2007, Condition A www.ecliptek.com Specification Subject to Change Without Notice 14 Pin DIP Revision Q 08/18/2006 8 Pin DIP Revision P Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200R PART NUMBER DATA SHEET ECLIPTEK CORPORATION EC1345HSETTTS-25.000M-G MECHANICAL DIMENSIONS (all dimensions in millimeters) PIN CONNECTION 1 Tri-State (High 7.620 0.203 0.8 0.1 (X3) Impedance) 1 4 4 Ground/Case Ground DIA 0.457 7.620 5 Output 0.1 (X4) 0.203 5 8 8 Supply Voltage LINE MARKING 5.08 MIN 1 ECLIPTEK 5.6 MAX 2 EC13TS EC13=Product Series MARKING 13.2 ORIENTATION MAX 3 25.000M 4 XXYZZ XX=Ecliptek Manufacturing 13.2 Code MAX Y=Last Digit of the Year ZZ=Week of the Year www.ecliptek.com Specification Subject to Change Without Notice 14 Pin DIP Revision Q 08/18/2006 8 Pin DIP Revision P Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200