PART NUMBER DATA SHEET EH1300HSTS-84.000M SVHC 144 Jun 20, 2013 ITEM DESCRIPTION Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 8 Pin DIP Metal Thru-Hole 84.000MHz 100ppm 0C to +70C ELECTRICAL SPECIFICATIONS Nominal Frequency 84.000MHz Frequency Tolerance/Stability 100ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Ouput Load Change, 1st Year Aging at 25C, Shock, and Vibration.) Aging at 25C 5ppm/year Maximum Operating Temperature Range 0C to +70C Supply Voltage 3.3Vdc 10% Input Current 35mA Maximum (No Load) Output Voltage Logic High (Voh) 2.7Vdc Minimum (IOH = -8mA) Output Voltage Logic Low (Vol) 0.5Vdc Maximum (IOL = +8mA) Rise/Fall Time 4nSec Maximum (Measured at 20% to 80% of waveform) Duty Cycle 50 10(%) (Measured at 50% of waveform) Load Drive Capability 15pF Maximum Output Logic Type CMOS Pin 1 Connection Tri-State (Disabled Output: High Impedance) Tri-State Input Voltage (Vih and Vil) 70% of Vdd Minimum to enable output, 20% of Vdd Maximum to disable output (High Impedance), No Connect to enable output. Absolute Clock Jitter 250pSec Maximum, 100pSec Typical One Sigma Clock Period Jitter 50pSec Maximum, 40pSec Typical Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C ENVIRONMENTAL & MECHANICAL SPECIFICATIONS Fine Leak Test MIL-STD-883, Method 1014, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Lead Integrity MIL-STD-883, Method 2004 Mechanical Shock MIL-STD-202, Method 213, Condition C Resistance to Soldering Heat MIL-STD-202, Method 210 Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010 Vibration MIL-STD-883, Method 2007, Condition A www.ecliptek.com Specification Subject to Change Without Notice 14 Pin DIP Revision C 12/01/2005 8 Pin DIP Revision C Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200 PART NUMBER DATA SHEET EH1300HSTS-84.000M MECHANICAL DIMENSIONS (all dimensions in millimeters) PIN CONNECTION 1 Tri-State (High 7.620 0.203 0.8 0.1 (X3) Impedance) 1 4 4 Case/Ground DIA 0.457 7.620 5 Output 0.1 (X4) 0.203 5 8 Supply Voltage 8 LINE MARKING 5.08 MIN 1 ECLIPTEK 2 EH13TS 5.6 MAX EH13=Product Series MARKING 13.2 3 84.000M ORIENTATION MAX 4 XXYZZ XX=Ecliptek Manufacturing Code 13.2 Y=Last Digit of the Year MAX ZZ=Week of the Year www.ecliptek.com Specification Subject to Change Without Notice 14 Pin DIP Revision C 12/01/2005 8 Pin DIP Revision C Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200