R PART NUMBER DATA SHEET ECLIPTEK CORPORATION EMDS23D2H-74.250M (Data Sheet downloaded on May 22, 2017) REGULATORY COMPLIANCE 2011/65 + 163 SVHC 2015/863 ITEM DESCRIPTION MEMS Clock Oscillators LVDS (DS) 3.3Vdc 6 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD) 74.250MHz 50ppm over 0C to +70C ELECTRICAL SPECIFICATIONS Nominal Frequency 74.250MHz Frequency Tolerance/Stability 50ppm Maximum over 0C to +70C (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Reflow, Shock, and Vibration) Aging at 25C 1ppm Maximum First Year Supply Voltage 3.3Vdc 10% Input Current 80mA Maximum (Excluding Load Termination Current) Output Voltage Logic High (Voh) 1.425Vdc Typical Output Voltage Logic Low (Vol) 1.075Vdc Typical Differential Output Error (dVod) 50mVdc Maximum Differential Output Voltage (Vod) 247mVdc Minimum, 350mVdc Typical, 454mVdc Maximum Offset Voltage (Vos) 1.125V Minimum, 1.250V Typical, 1.375V Maximum Rise/Fall Time 225pSec Typical, 325pSec Maximum (Measured over 20% to 80% of waveform) Duty Cycle 50 5(%) (Measured at 50% of waveform) Offset Error (dVos) 50mVdc Maximum Load Drive Capability 100 Ohms Between Output and Complementary Output Output Logic Type LVDS Logic Control / Additional Output Output Enable (OE) and Complementary Output Output Control Input Voltage Vih of 70% of Vdd Minimum or No Connect to Enable Output and Complementary Output, Vil of 30% of Vdd Maximum to Disable Output and Complementary Output (High Impedance) Output Enable Current 75mA Maximum (Without Load) Period Jitter (Deterministic) 0.2pSec Typical Period Jitter (Random) 2.0pSec Typical Period Jitter (RMS) 1.8pSec Typical, 2.5pSec Maximum Period Jitter (pk-pk) 25pSec Typical, 30pSec Maximum RMS Phase Jitter (Fj = 637kHz to 2.1pSec Typical 10MHz Random) RMS Phase Jitter (Fj = 1MHz to 1.7pSec Typical 20MHz Random) RMS Phase Jitter (Fj = 1.875MHz to 1.5pSec Typical 20MHz Random) Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility MIL-STD-883, Method 3015, Class 2, HBM 2000V Flammability UL94-V0 Mechanical Shock MIL-STD-883, Method 2002, Condition G, 30,000G Moisture Resistance MIL-STD-883, Method 1004 Moisture Sensitivity Level J-STD-020, MSL 1 www.ecliptek.com Specification Subject to Change Without Notice Revision B 09/13/2012 Page 1 of 7 Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200R PART NUMBER DATA SHEET ECLIPTEK CORPORATION EMDS23D2H-74.250M ENVIRONMENTAL & MECHANICAL SPECIFICATIONS CONTINUED Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 (Pads on bottom of package only) Temperature Cycling MIL-STD-883, Method 1010, Condition B Thermal Shock MIL-STD-883, Method 1011, Condition B Vibration MIL-STD-883, Method 2007, Condition A, 20G www.ecliptek.com Specification Subject to Change Without Notice Revision B 09/13/2012 Page 2 of 7 Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200