EMK23H2H-66.000M
(Data Sheet downloaded on Oct 10, 2019)
REGULATORY COMPLIANCE
2011/65 +
191 SVHC
2015/863
ITEM DESCRIPTION
MEMS Clock Oscillators LVCMOS (CMOS) 3.3Vdc 4 Pad 3.2mm x 5.0mm Plastic Surface Mount (SMD) 66.000MHz 50ppm over
-40C to +85C
ELECTRICAL SPECIFICATIONS
Nominal Frequency 66.000MHz
Frequency Tolerance/Stability 50ppm Maximum over -40C to +85C (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability
over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C,
260C Reflow, Shock, and Vibration)
Aging at 25C 1ppm Maximum First Year
Supply Voltage 3.3Vdc 10%
Input Current 25mA Maximum
Output Voltage Logic High (Voh) 90% of Vdd Minimum (IOH=-8mA)
Output Voltage Logic Low (Vol) 10% of Vdd Maximum (IOL=+8mA)
Rise/Fall Time 2nSec Maximum (Measured from 20% to 80% of waveform)
Duty Cycle 50 5(%) (Measured at 50% of waveform)
Load Drive Capability 15pF Maximum
Output Logic Type CMOS
Output Control Function Tri-State (Disabled Output: High Impedance)
Output Control Input Voltage +0.7Vdd Minimum or No Connect to Enable Output, +0.3Vdd Maximum to Disable Output
Peak to Peak Jitter (tPK) 250pSec Maximum, 100pSec Typical
Start Up Time 50mSec Maximum
Storage Temperature Range -55C to +125C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility MIL-STD-883, Method 3015, Class 2, HBM 2000V
Flammability UL94-V0
Mechanical Shock MIL-STD-883, Method 2002, Condition G, 30,000G
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity Level J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003 (Pads on bottom of package only)
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Thermal Shock MIL-STD-883, Method 1011, Condition B
Vibration MIL-STD-883, Method 2007, Condition A, 20G
www.ecliptek.com | Specification Subject to Change Without Notice | Revision K 09/10/2014 | Page 1 of 6
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EMK23H2H-66.000M
MECHANICAL DIMENSIONS (all dimensions in millimeters)
PIN CONNECTION
0.85
1 Tri-State
3.20
0.15
1.20 0.10 (x4)
0.15
2 Ground
0.08
MAX
3 Output
4 Supply Voltage
2
R0.58
3
0.10
LINE MARKING
5.00 2.39
1.15
1 XXXX or XXXXX
0.15 0.10
0.10
XXXX or XXXXX=Ecliptek
1
(x4)
4 Manufacturing Lot Code
C0.35
0.10
0.80
0.15
Suggested Solder Pad Layout
All Dimensions in Millimeters
0.5 MAX
1.60 (X4)
1.50 (X4)
Solder Land
1.04
(X4)
0.60
All Tolerances are 0.1
www.ecliptek.com | Specification Subject to Change Without Notice | Revision K 09/10/2014 | Page 2 of 6
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200