EMRA46M2H-14.7456M (Data Sheet downloaded on Dec 6, 2018) REGULATORY COMPLIANCE 2011/65 + 191 SVHC 2015/863 ITEM DESCRIPTION MEMS Clock Oscillators LVCMOS (CMOS) 2.25Vdc to 3.63Vdc 4 Pad 2.0mm x 2.5mm Plastic Surface Mount (SMD) 14.7456MHz 20ppm over -40C to +85C ELECTRICAL SPECIFICATIONS Nominal Frequency 14.7456MHz Frequency Tolerance/Stability 20ppm Maximum over -40C to +85C (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, and First Year Aging at 25C) Aging at 25C 1.5ppm Maximum First Year Supply Voltage 2.25Vdc to 3.63Vdc Input Current 5mA Maximum (No Load) Output Voltage Logic High (Voh) 90% of Vdd Minimum (IOH = -4mA) Output Voltage Logic Low (Vol) 10% of Vdd Maximum (IOL = +4mA) Rise/Fall Time 1.2nSec Typical, 3nSec Maximum (Measured from 20% to 80% of waveform) Duty Cycle 50 5(%) (Measured at 50% of waveform) Load Drive Capability 15pF Maximum Output Logic Type CMOS Output Control Function Tri-State (Disabled Output: High Impedance) Output Control Input Voltage Logic 70% of Vdd Minimum or No Connect to Enable Output High (Vih) Output Control Input Voltage Logic 30% of Vdd Maximum to Disable Output Low (Vil) Tri-State Output Enable Time 150nSec Maximum Tri-State Output Disable Time 150nSec Maximum Period Jitter (RMS) 2pSec Typical, 4pSec Maximum RMS Phase Jitter (Fj = 900kHz to 0.5pSec Typical, 1pSec Maximum 7.5MHz Random) RMS Phase Jitter (Fj = 12kHz to 1.5pSec Typical, 3pSec Maximum 20MHz Random) Start Up Time 5mSec Maximum Storage Temperature Range -65C to +150C ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility JESD22-A114, HBM, 2000V Flammability UL94-V0 Mechanical Shock MIL-STD-883, Method 2002, Condition E, 10,000G Moisture Sensitivity J-STD-020, MSL 1 Solderability MIL-STD-883, Method 2003 (Four I/O Pads on bottom of package only) Temperature Cycling JESD22-A104, Condition B Vibration MIL-STD-883, Method 2007, Condition A, 20G www.ecliptek.com Specification Subject to Change Without Notice Revision A 02/01/2017 Page 1 of 6 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EMRA46M2H-14.7456M MECHANICAL DIMENSIONS (all dimensions in millimeters) PIN CONNECTION 1 Tri-State (High Impedance) 2.00 2 Ground 0.85 0.50 0.05 MAX 0.05 (x4) 3 Output 4 Supply Voltage 4 1 LINE MARKING 2.50 1.00 1 Ecliptek Manufacturing 0.05 0.05 Identifier 3 2 0.75 0.05 (x4) 1.10 0.05 Suggested Solder Pad Layout All Dimensions in Millimeters 1.00 (X4) 1.10 (X4) Solder Land 0.80 (X4) 0.50 All Tolerances are 0.1 www.ecliptek.com Specification Subject to Change Without Notice Revision A 02/01/2017 Page 2 of 6 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200