EMRE12C1H-200.000M
(Data Sheet downloaded on Dec 6, 2018)
REGULATORY COMPLIANCE
2011/65 +
191 SVHC
2015/863
ITEM DESCRIPTION
MEMS Clock Oscillators LVDS (DS) 2.5Vdc 6 Pad 5.0mm x 7.0mm Plastic Surface Mount (SMD) 200.000MHz 100ppm over 0C
to +70C
ELECTRICAL SPECIFICATIONS
Nominal Frequency 200.000MHz
Frequency Tolerance/Stability 100ppm Maximum over 0C to +70C (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability
over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging at 25C,
Reflow, Shock, and Vibration)
Aging at 25C 1ppm Maximum First Year
Supply Voltage 2.5Vdc 10%
Input Current 45mA Typical, 55mA Maximum (Excluding Load Termination Current)
Differential Output Error (dVod) 50mVdc Maximum
Differential Output Voltage (Vod) 200mVdc Minimum, 350mVdc Typical, 500mVdc Maximum
Offset Voltage (Vos) 1.125V Minimum, 1.20V Typical, 1.375V Maximum
Rise/Fall Time 500pSec Typical, 600pSec Maximum (Measured over 20% to 80% of waveform)
Duty Cycle 50 10(%) (Measured at 50% of waveform)
Offset Error (dVos) 50mVdc Maximum
Load Drive Capability 100 Ohms Between Output and Complementary Output
Output Logic Type LVDS
Logic Control / Additional Output Output Enable (OE) and Complementary Output
Output Control Input Voltage Vih of 70% of Vdd Minimum or No Connect to Enable Output and Complementary Output, Vil of 30% of Vdd Maximum
to Disable Output and Complementary Output (High Impedance)
Output Enable Current 35mA Maximum (OE) Without Load
RMS Phase Jitter 0.5pSec Typical, 1pSec Maximum (Fj = 12kHz to 20MHz; Random)
Period Jitter (Deterministic) 0.2pSec Typical
Period Jitter (Random) 1.0pSec Typical
Period Jitter (RMS) 1.4pSec Typical, 1.7pSec Maximum
Period Jitter (pk-pk) 15pSec Typical, 20pSec Maximum
Start Up Time 10mSec Maximum
Storage Temperature Range -55C to +125C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility MIL-STD-883, Method 3015, Class 2, HBM 2000V
Flammability UL94-V0
Mechanical Shock MIL-STD-883, Method 2002, Condition G, 30,000G
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity Level J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003 (Six I/O Pads on bottom of package only)
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Thermal Shock MIL-STD-883, Method 1011, Condition B
Vibration MIL-STD-883, Method 2007, Condition A, 20G
www.ecliptek.com | Specification Subject to Change Without Notice | Revision A 05/11/2012 | Page 1 of 6
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EMRE12C1H-200.000M
MECHANICAL DIMENSIONS (all dimensions in millimeters)
PIN CONNECTION
0.85
1.20
1 Output Enable (OE)
5.00
0.15
0.10 (x6)
0.15
0.08 2 No Connect
MAX
3 Case Ground
3 4
4 Output
5 Complementary Output
7.00
5.08
2 5 6 Supply Voltage
0.15
0.10
LINE MARKING
1 XXXXX
1 6
XXXXX=Ecliptek
2.54 TYP
Manufacturing Lot Code
2.60
1.40
0.15
0.10 (x6)
Suggested Solder Pad Layout
All Dimensions in Millimeters
1.80 (X6)
2.00 (X6)
0.54 (X4)
Solder Land
2.39 (X6)
All Tolerances are 0.1
www.ecliptek.com | Specification Subject to Change Without Notice | Revision A 05/11/2012 | Page 2 of 6
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200