EP1100HSTSC-13.560M (Data Sheet downloaded on Dec 6, 2018) REGULATORY COMPLIANCE 144 SVHC 2011/65 ITEM DESCRIPTION Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc 8 Pin DIP Metal Thru-Hole 13.560MHz 100ppm -20C to +70C ELECTRICAL SPECIFICATIONS Nominal Frequency 13.560MHz Frequency Tolerance/Stability 100ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range,Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration) Aging at 25C 5ppm/year Maximum Operating Temperature Range -20C to +70C Supply Voltage 5.0Vdc 10% Input Current 45mA Maximum (Unloaded) Output Voltage Logic High (Voh) Vdd-0.4Vdc Minimum (IOH=-16mA) Output Voltage Logic Low (Vol) 0.4Vdc Maximum (IOL=+16mA) Rise/Fall Time 4nSec Maximum (Measured at 20% to 80% of waveform) Duty Cycle 50 10(%) (Measured at 1.4Vdc with TTL Load Measured at 50% of waveform with HCMOS Load) Load Drive Capability 50pF HCMOS Load Maximum Output Logic Type CMOS Pin 1 Connection Tri-State (Disabled Output: High Impedance) Pin 1 Input Voltage (Vih and Vil) +2.0Vdc Minimum to enable output, +0.8Vdc Maximum to disable output, No Connect to enable output. Disable Current 30mA Maximum (Pin 1 = Ground) Standby Current 50A Maximum (Pin 1 = Ground) Peak to Peak Jitter (tPK) 100pSec Maximum, 50pSec Typical RMS Period Jitter (tRMS) 13pSec Maximum, 8pSec Typical Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C ENVIRONMENTAL & MECHANICAL SPECIFICATIONS Fine Leak Test MIL-STD-883, Method 1014, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Lead Integrity MIL-STD-883, Method 2004 Mechanical Shock MIL-STD-202, Method 213, Condition C Resistance to Soldering Heat MIL-STD-202, Method 210 Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010 Vibration MIL-STD-883, Method 2007, Condition A www.ecliptek.com Specification Subject to Change Without Notice 14 Pin DIP Revision E 12/01/2005 8 Pin DIP Revision E Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EP1100HSTSC-13.560M MECHANICAL DIMENSIONS (all dimensions in millimeters) PIN CONNECTION 1 Tri-State (High 7.620 0.203 0.8 0.1 (X3) Impedance) 1 4 4 Case/Ground DIA 0.457 7.620 5 Output 0.1 (X4) 0.203 5 8 8 Supply Voltage LINE MARKING 5.08 MIN 1 ECLIPTEK 5.6 MAX 2 EP11TS EP11=Product Series MARKING 13.2 ORIENTATION MAX 3 13.560M 4 XXYZZ XX=Ecliptek Manufacturing 13.2 Code MAX Y=Last Digit of the Year ZZ=Week of the Year www.ecliptek.com Specification Subject to Change Without Notice 14 Pin DIP Revision E 12/01/2005 8 Pin DIP Revision E Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200