EP1145TSL-20.736M Abracon

EP11 Series EP11 Programmable Crystal Oscillators HCMOS/TTL Output +5.0V Supply Voltage Tri-State and Power Down Options Custom Lead Length & Gull Wing Options 14 pin DIP Metal Package RoHS Compliant (Pb-free) OSCILLATOR ELECTRICAL SPECIFICATIONS 1.000MHz to 125.000MHz Frequency Range Operating Temperature Range -20C to 70C or -40C to 85C -55C to 125C Storage Temperature Range Supply Voltage (V ) 5.0V 10% DD DC 45mA Maximum (Unloaded) Input Current Disable Current (TS Option) 30mA Maximum (Pin 1=Ground) 50A Maximum (Pin 1=Ground) Standby Current (PD Option) Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25C, 100ppm or 50ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration Output Voltage Logic High (V ) w/TTL Load 2.4V Minimum I =-16mA OH DC OH w/CMOS Load V -0.4V Minimum I =-16mA DD DC OH Output Voltage Logic Low (V ) w/TTL Load or w/CMOS Load 0.4V Maximum I =+16mA OL DC OL 0.8V to 2.0 V w/TTL Load or 20% to 80% of Waveform 4 nSeconds Maximum Rise Time / Fall Time DC DC w/CMOS Load at 1.4V w/TTL Load at 50% of waveform w/CMOS Load 50 10(%) (Standard) Duty Cycle DC at 1.4V w/TTL Load (<27.000MHz only), or 50 5(%) (Optional) DC 50% of waveform w/CMOS Load (<50.000MHz only) Load Drive Capability / <50.000MHz 50pF CMOS Load Maximum >50.000MHz 15pF CMOS Load Maximum Output Type-CMOS Load Drive Capability / <40.000MHz 10TTL Load Maximum >40.000MHz 5TTL Load Maximum Output Type-TTL Output Control Function TS Tri-State PD Power Down Output Control Function Input Voltage V : No Connection or >2.0V Enables Output IH DC V : (TS Option) <0.8V Disables Output: High Impedence IL DC V : (PD Option) <0.8V Disables Output: Logic Low IL DC 5ppm / year Maximum Aging (at 25C) Start Up Time 10 mSeconds Maximum <12.000MHz 50pSec Maximum, 13pSec Typical RMS Jitter >12.000MHz 13pSec Maximum, 8pSec Typical <12.000MHz 500pSec Maximum, 90pSec Typical Peak to Peak Jitter >12.000MHz 100pSec Maximum, 50pSec Typical MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP11 14 pin DIP 5.0V OS44 12/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EP11 00 ET T TS L - 24.000M - CL125 FREQUENCY TOLERANCE / STABILITY AVAILABLE OPTIONS 00=100ppm Maximum Blank=None 45=50ppm Maximum CLXXX=Custom Lead Length G=Full Size Gull Wing OPERATING TEMP. RANGE Blank=-20C to 70C , ET=-40C to 85C FREQUENCY DUTY CYCLE OUTPUT TYPE Blank=50 10(%) , T=50 5(%) L=TTL, C=CMOS OUTPUT CONTROL FUNCTION TS=Tri-State Enable High, PD=Power Down NOTES MECHANICAL DIMENSIONS MARKING SPECIFICATIONS ALL DIMENSIONS IN MILLIMETERS Line 1: ECLIPTEK Line 2: EP11 TS Output Control Function PD = Power Down TS = Tri-State Enable High Series Designator Line 3: XX.XXX M Frequency (5 Digits Maximum + Decimal) Pin 1: Tri-State or Power Down Pin 8: Output Line 4: XX Y ZZ Pin 7: Case Ground Pin 14: Supply Voltage Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Characteristic Specification Fine Leak Test MIL-STD-883, Method 1014, Condition A Solderability MIL-STD-883, Method 2002 Gross Leak Test MIL-STD-883, Method 1014, Condition C Temperature Cycling MIL-STD-883, Method 1010 Mechanical Shock MIL-STD-202, Method 213, Condition C Resistance to Soldering Heat MIL-STD-883, Method 210 Vibration MIL-STD-883, Method 2007, Condition A Resistance to Solvents MIL-STD-883, Method 215 Lead Integrity MIL-STD-883, Method 2004 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EP11 14 pin DIP 5.0V OS44 12/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.