RoHS Pb EP1300HSETTS-100.000M EP13 00 HS ET TS -100.000M Series Nominal Frequency RoHS Compliant (Pb-free) 3.3V 8 Pin DIP Metal 100.000MHz Thru-Hole LVCMOS Programmable Oscillator Pin 1 Connection Frequency Tolerance/Stability Tri-State (Disabled Output: High Impedance) 100ppm Maximum Duty Cycle Package 50 10(%) Operating Temperature Range -40C to +85C ELECTRICAL SPECIFICATIONS Nominal Frequency 100.000MHz Frequency Tolerance/Stability 100ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range,Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration) Aging at 25C 5ppm/year Maximum Operating Temperature Range -40C to +85C Supply Voltage 3.3Vdc 0.3Vdc Input Current 28mA Maximum (Unloaded) Output Voltage Logic High (Voh) Vdd-0.4Vdc Minimum (IOH = -8mA) Output Voltage Logic Low (Vol) 0.4Vdc Maximum (IOL = +8mA) Rise/Fall Time 4nSec Maximum (Measured at 20% to 80% of waveform) Duty Cycle 50 10(%) (Measured at 50% of waveform) Load Drive Capability 15pF Maximum Output Logic Type CMOS Pin 1 Connection Tri-State (Disabled Output: High Impedance) Pin 1 Input Voltage (Vih and Vil) 70% of Vdd Minimum to enable output, 20% of Vdd Maximum to disable output, No Connect to enable output. Standby Current 20A Maximum (Pin 1 = Ground) Disable Current 16mA Maximum (Pin 1 = Ground) Peak to Peak Jitter (tPK) 100pSec Maximum, 60pSec Typical RMS Period Jitter (tRMS) 13pSec Maximum, 10pSec Typical Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C ENVIRONMENTAL & MECHANICAL SPECIFICATIONS Fine Leak Test MIL-STD-883, Method 1014, Condition A Gross Leak Test MIL-STD-883, Method 1014, Condition C Lead Integrity MIL-STD-883, Method 2004 Mechanical Shock MIL-STD-202, Method 213, Condition C Resistance to Soldering Heat MIL-STD-202, Method 210 Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010 Vibration MIL-STD-883, Method 2007, Condition A www.ecliptek.com Specification Subject to Change Without Notice Rev E 8/12/2010 Page 1 of 6EP1300HSETTS-100.000M MECHANICAL DIMENSIONS (all dimensions in millimeters) PIN CONNECTION 1 Tri-State (High 7.620 0.203 0.8 0.1 (X3) Impedance) 1 4 4 Case/Ground DIA 0.457 7.620 5 Output 0.1 (X4) 0.203 8 Supply Voltage 8 5 LINE MARKING 5.08 MIN 1 ECLIPTEK 2 EP13TS 5.6 MAX EP13=Product Series MARKING 13.2 3 100.00M ORIENTATION MAX 4 XXYZZ XX=Ecliptek Manufacturing Code 13.2 Y=Last Digit of the Year MAX ZZ=Week of the Year OUTPUT WAVEFORM & TIMING DIAGRAM VIH VIL VOH 80% of Waveform OUTPUT DISABLE 50% of Waveform (HIGH IMPEDANCE STATE) 20% of Waveform VOL tPLZ tPZL Fall Rise TW Time Time T Duty Cycle (%) = TW/T x 100 www.ecliptek.com Specification Subject to Change Without Notice Rev E 8/12/2010 Page 2 of 6 CLOCK OUTPUT TRI-STATE INPUT