EP2600PD-3.072M
(Data Sheet downloaded on Dec 17, 2018)
REGULATORY COMPLIANCE
2011/65 +
191 SVHC
2015/863
ITEM DESCRIPTION
Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
3.072MHz 100ppm -20C to +70C
ELECTRICAL SPECIFICATIONS
Nominal Frequency 3.072MHz
Frequency Tolerance/Stability 100ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating
Temperature Range,Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration)
Aging at 25C 5ppm/year Maximum
Operating Temperature Range -20C to +70C
Supply Voltage 3.3Vdc 10%
Input Current 28mA Maximum (Unloaded)
Output Voltage Logic High (Voh) Vdd-0.4Vdc Minimum (IOH= -8mA)
Output Voltage Logic Low (Vol) 0.4Vdc Maximum (IOL= +8mA)
Rise/Fall Time 4nSec Maximum (Measured at 20% to 80% of waveform)
Duty Cycle 50 10(%) (Measured at 50% of waveform)
Load Drive Capability 30pF Maximum
Output Logic Type CMOS
Pin 1 Connection Power Down (Disable Output: Logic Low)
Tri-State Input Voltage (Vih and Vil) 70% of Vdd Minimum to enable output, 20% of Vdd Maximum to disable output, No Connect to enable output.
Standby Current 20A Maximum (Pin 1 = Ground)
Absolute Clock Jitter 250pSec Maximum, 100pSec Typical
One Sigma Clock Period Jitter 50pSec Maximum
Start Up Time 10mSec Maximum
Storage Temperature Range -55C to +125C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Flammability UL94-V0
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-883, Method 2002, Condition B
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Vibration MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Revision H 03/25/2014 | Page 1 of 6
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EP2600PD-3.072M
MECHANICAL DIMENSIONS (all dimensions in millimeters)
PIN CONNECTION
1 Power Down (Logic Low)
7.00 5.08
0.15 0.15 2 Ground/Case Ground
3 Output
3 4
4 Supply Voltage
MARKING 2.20
5.00
LINE MARKING
ORIENTATION 0.15
0.15
1 ECLIPTEK
2 1
2 3.0720M
1.4 0.2 3 XXXXX
1.4 0.1
XXXXX=Ecliptek
Manufacturing Identifier
3.68
0.15
1.60 0.20
Suggested Solder Pad Layout
All Dimensions in Millimeters
2.0 (X4)
2.2 (X4)
Solder Land
2.88
(X4)
1.81
All Tolerances are 0.1
www.ecliptek.com | Specification Subject to Change Without Notice | Revision H 03/25/2014 | Page 2 of 6
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200