EQVA23C1C1H-50.000M (Data Sheet downloaded on Dec 4, 2018) REGULATORY COMPLIANCE 2011/65 + 191 SVHC 2015/863 ITEM DESCRIPTION Voltage Controlled Quartz Crystal Clock Oscillators VCXO LVCMOS (CMOS) 3.3Vdc 6 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD) 50.000MHz 50ppm -40C to +85C ELECTRICAL SPECIFICATIONS Nominal Frequency 50.000MHz Frequency Tolerance/Stability 50ppm Maximum (Inclusive of all conditions: Calibration Tolerance (at 25C), Frequency Stability over the Operating Temperature Range, Supply Voltage Change and Output Load Change) Aging at 25C 2ppm Maximum First Year, 10ppm/10 Years Maximum Operating Temperature Range -40C to +85C Supply Voltage 3.3Vdc 5% Input Current 20mA Maximum (Unloaded) Output Voltage Logic High (Voh) 90% of Vdd Minimum (IOH = -4mA) Output Voltage Logic Low (Vol) 10% of Vdd Maximum (IOL = +4mA) Rise/Fall Time 3nSec Maximum (Measured at 10% to 90% of Waveform) Duty Cycle 50 10(%) (Measured at 50% of Waveform) Load Drive Capability 15pF Maximum Output Logic Type CMOS Absolute Pull Range 30ppm Minimum (Inclusive of all conditions: Calibration Tolerance (at 25C), Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Shock, Vibration, and 10 Year Aging over the Control Voltage (Vc)) Control Voltage 0.3Vdc to 3.0Vdc (Test Condition for APR) Control Voltage Range 0.0Vdc to Vdd +0.6Vdc Linearity 5% Typical, 10% Maximum Transfer Function Positive Tranfer Characteristic Modulation Bandwidth 10kHz Minimum (Measured at -3dB, Vc = 1.65Vdc) Input Impedance 500kOhms Minimum Input Leakage Current 10A Maximum Phase Noise -64dBc/Hz at 10Hz offset -96dBc/Hz at 100Hz offset -124dBc/Hz at 1kHz offset -131dBc/Hz at 10kHz offset - 132dBc/Hz at 100kHz offset -149dBc/Hz at 1MHz offset -157dBc/Hz at 10MHz offset -159dBc/Hz at 20MHz offset (All Values are Typical) Output Control Function Output Enable (OE) Output Control Input Voltage Logic 90% of Vdd Minimum or No Connect to Enable Output High (Vih) Output Control Input Voltage Logic 10% of Vdd Maximum to Disable Output (High Impedance) Low (Vil) Output Enable Time 100nSec Maximum Output Disable Time 50nSec Maximum Output Enable Current 18mA Maximum (Without Load (Pin 2 = Ground)) RMS Phase Jitter 1.5pSec Maximum (Fj=12kHz to 20MHz (Random)) Period Jitter (Deterministic) 0.2pSec Typical Period Jitter (Random) 2pSec Typical Period Jitter (RMS) 3pSec Maximum Period Jitter (pk-pk) 30pSec Maximum Start Up Time 10mSec Maximum www.ecliptek.com Specification Subject to Change Without Notice Revision A 01/09/2015 Page 1 of 7 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EQVA23C1C1H-50.000M ELECTRICAL SPECIFICATIONS CONTINUED Storage Temperature Range -55C to +125C ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V Fine Leak Test MIL-STD-883, Method 1014, Condition A Flammability UL94-V0 Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-883, Method 2002, Condition B Moisture Resistance MIL-STD-883, Method 1004 Moisture Sensitivity J-STD-020, MSL 1 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010, Condition B Vibration MIL-STD-883, Method 2007, Condition A www.ecliptek.com Specification Subject to Change Without Notice Revision A 01/09/2015 Page 2 of 7 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200