EV32C6A3A1-24.576M TR
(Data Sheet downloaded on Dec 6, 2018)
REGULATORY COMPLIANCE
2011/65 +
191 SVHC
2015/863
ITEM DESCRIPTION
Voltage Controlled Quartz Crystal Clock Oscillators VCXO LVCMOS/TTL (CMOS) 3.3Vdc 6 Pad 5.0mm x 7.0mm Ceramic
Surface Mount (SMD) 24.576MHz 50ppm Maximum 0C to +70C 50ppm Minimum 10% Typical, 20% Maximum
ELECTRICAL SPECIFICATIONS
Nominal Frequency 24.576MHz
Frequency Tolerance/Stability 50ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating
Temperature Range, Supply Voltage Change, Output Load Change, Shock, and Vibration.)
Aging at 25C 2ppm/First Year Typical, 10ppm/10 Years Maximum
Operating Temperature Range 0C to +70C
Supply Voltage 3.3Vdc 10%
Input Current 15mA Maximum
Output Voltage Logic High (Voh) 90% of Vdd Minimum (IOH = -4mA)
Output Voltage Logic Low (Vol) 10% of Vdd Maximum (IOL = +4mA)
Rise/Fall Time 5nSec Maximum (Measured at 20% to 80% of Waveform)
Duty Cycle 50 10(%) (Measured at 50% of Waveform)
Load Drive Capability 15pF LVCMOS Load Maximum
Output Logic Type CMOS
Absolute Pull Range 50ppm Minimum (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating
Temperature Range, Supply Voltage Change, Output Load Change, Shock, Vibration, and Aging over the Control
Voltage (Vc).)
Control Voltage 0.3Vdc to 3.0Vdc (Test Condition for APR)
Control Voltage Range 0.0Vdc to Vdd
Linearity 10% Typical, 20% Maximum
Transfer Function Positive Tranfer Characteristic
Modulation Bandwidth 10kHz Minimum (Measured at -3dB, Vc = 1.65Vdc)
Input Impedance 50kOhms Minimum
Input Leakage Current 10A Maximum
Phase Noise All Values are Typical
-70dBc/Hz at offset of 10Hz
-100dBc/Hz at offset of 100Hz
-130dBc/Hz at offset of 1kHz
-147dBc/Hz at offset of 10kHz
-152dBc/Hz at offset of 100kHz
-155dBc/Hz at offset of 1MHz
Tri-State Input Voltage (Vih and Vil) 90% of Vdd Minimum or No Connect to Enable Output, 10% of Vdd Maximum to Disable Output (High Impedance)
RMS Phase Jitter 1pSec Maximum (Fj = 12kHz to 20MHz; Random)
Start Up Time 10mSec Maximum
Storage Temperature Range -55C to +125C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Flammability UL94-V0
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-883, Method 2002, Condition B
www.ecliptek.com | Specification Subject to Change Without Notice | Revision N 04/14/2014 | Page 1 of 9
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EV32C6A3A1-24.576M TR
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS CONTINUED
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Vibration MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Revision N 04/14/2014 | Page 2 of 9
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200