EV32C6 Series REGULATORY COMPLIANCE 2011/65 + 191 SVHC 2015/863 ITEM DESCRIPTION Voltage Controlled Quartz Crystal Clock Oscillators VCXO LVCMOS/TTL (CMOS) 3.3Vdc 6 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD) ELECTRICAL SPECIFICATIONS Nominal Frequency 1.544MHz to 77.76MHz Frequency Tolerance/Stability Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Shock, and Vibration. 50ppm Maximum Aging at 25C 2ppm/First Year Typical, 10ppm/10 Years Maximum Operating Temperature Range 0C to +70C -40C to +85C Supply Voltage 3.3Vdc 10% Input Current 15mA Maximum Output Voltage Logic High (V ) IOH = -4mA OH 90% of Vdd Minimum Output Voltage Logic Low (VOL) IOL = +4mA 10% of Vdd Maximum Rise/Fall Time Measured at 20% to 80% of Waveform 5nSec Maximum Duty Cycle Measured at 50% of Waveform 50 10(%) Load Drive Capability 10TTL Load or 30pF LVCMOS Load Maximum over Nominal Frequency of 1.544MHz to 12.288MHz 15pF LVCMOS Load Maximum over Nominal Frequency of 12.288001MHz to 77.76MHz Output Logic Type CMOS Absolute Pull Range Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, Shock, Vibration, and Aging over the Control Voltage (Vc). 50ppm Minimum 80ppm Minimum (Only available over Nominal Frequency range of 1.544MHz to 51.84MHz) 100ppm Minimum (Only available over Nominal Frequency range of 1.544MHz to 36MHz) Control Voltage Test Condition for APR 0.3Vdc to 3.0Vdc Control Voltage Range 0.0Vdc to Vdd Linearity 10% Typical, 20% Maximum Transfer Function Positive Transfer Characteristic Modulation Bandwidth Measured at -3dB, Vc = 1.65Vdc 10kHz Minimum Input Impedance 50kOhms Minimum Input Leakage Current 10A Maximum Phase Noise All Values are Typical -70dBc/Hz at offset of 10Hz -100dBc/Hz at offset of 100Hz -130dBc/Hz at offset of 1kHz -147dBc/Hz at offset of 10kHz -152dBc/Hz at offset of 100kHz -155dBc/Hz at offset of 1MHz Tri-State Input Voltage (Vih and Vil) 90% of Vdd Minimum or No Connect to Enable Output, 10% of Vdd Maximum to Disable Output (High Impedance) RMS Phase Jitter Fj = 12kHz to 20MHz Random 1pSec Maximum Revised N: 4/14/2014 Page 1 of 9 www.ecliptek.com EV32C6 Series Start Up Time 10mSec Maximum Storage Temperature Range -55C to +125C PART NUMBERING GUIDE ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V Fine Leak Test MIL-STD-883, Method 1014, Condition A Flammability UL94-V0 Gross Leak Test MIL-STD-883, Method 1014, Condition C Mechanical Shock MIL-STD-883, Method 2002, Condition B Moisture Resistance MIL-STD-883, Method 1004 Moisture Sensitivity J-STD-020, MSL 1 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010, Condition B Vibration MIL-STD-883, Method 2007, Condition A Revised N: 4/14/2014 Page 2 of 9 www.ecliptek.com