F3345-250 Abracon

7mm x 5mm FO7HH HCMOS SMD Oscillator (Former F3345 Series) Features HCMOS Output Stabilities to 20 PPM Temperature Ranges to -40C to +85C Supply Voltage: 5.0V ELECTRICAL CHARACTERISTICS PARAMETERS MAX (Unless otherwise noted) Frequency Range (FO) 1 ~ 125MHz Temperature Range Storage (TSTG) -55C ~ +125C Supply Voltage (VDD) 5.0V 10% Input Current (I ) DD 1.000 ~ 25.000MHz 25 mA 25.000+ ~ 50.000MHz 40 mA 50.000+ ~ 67.000MHz 60 mA 67.000+ ~ 80.000MHz 73 mA 80.000+ ~ 125.000MHz 90 mA Output Symmetry (50% VDD) 1 ~ 80MHz 45/55% 80+ ~ 125MHz 40/60% Rise/Fall Time (10%/90% VDD Levels) (TR/TF) 1 ~ 80.000MHz 7nS 80+ ~ 100MHz 5nS 100+ ~ 125MHz 4nS Output Voltage (V ) 10 % V OL DD (V ) 90 % V Min OH DD Output Load (HCMOS) 50 pF Start-up Time (TS) 10 mS 1 Output Disable Time 100 nS 1 Output Enable Time 100 nS ENABLE / DISABLE FUNCTION Pin1 Output (pin 3) 1 OPEN Active 1 Level V 70%V Active IH DD 0 Level V 30%V High Z IL DD Available Options by Stability & Operating Temp Frequency Stability Operating Temperature (C) Frequency Range (MHz) 2 100PPM -10 ~ +70 1.000 ~ 125.000 2 100PPM -40 ~ +85 1.000 ~ 125.000 2 50PPM -10 ~ +70 1.000 ~ 125.000 2 50PPM -40 ~ +85 1.000 ~ 125.000 2 25PPM -10 ~ +70 1.000 ~ 125.000 3 25PPM -40 ~ +85 1.000 ~ 80.000 3 20PPM -10 ~ +70 1.000 ~ 80.000 1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open 2 Inclusive of 25C tolerance, operating temperature range, input voltage change, load change, Reflow, one year aging, shock, and vibration. 3 Inclusive of 25C tolerance and operating temperature range. Revised A: 10/03/2019 Page 1 of 3 www.foxonline.com 7mm x 5mm FO7HH HCMOS SMD Oscillator (Former F3345 Series) DIMENSIONS / MECHANICAL SPECIFICATIONS Note: 1, A 0.01F capacitor should be placed between V DD (Pin 4) and G (Pin2) to minimize power supply line ND noise. 2, Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. STANDARD SPECIFICATIONS PARAMETERS MAX (Unless otherwise noted) Maximum Soldering Temp / Time 260C / 10 Seconds x 2 Moisture Sensitivity Level (MSL) N/A Termination Finish Au (0.3~1m) over Ni (1.27~8.89m) Seal Method Seam Lead (Pb) Free Yes RoHS Compliant Yes, no exemptions REACH Compliant (latest version) Yes Revised A: 10/03/2019 Page 2 of 3 www.foxonline.com