7.5mm x 5.0mm FC7AS Ceramic SMD Crystal (Former FE) Features Tolerances down to 30 PPM Stabilities down to 15 PPM Temperature Ranges as wide as -40 C to +85 C rd th Available above 28MHz (3 & 5 Overtone Modes) STANDARD SPECIFICATIONS DIMENSIONS / MECHANICAL PARAMETERS MAX (Unless otherwise noted) SPECIFICATIONS Frequency Range 6.000 ~ 160.000 MHz Frequency Tolerance 25C (See options below) Frequency Stability, ref 25C (See options below) Temperature Range Operating (TOPR) (See options below) Storage (T ) -40C ~ +85C STG Shunt Capacitance (CO) 5 pF Load Capacitance (C ) (See options below) L Drive Level 0.5 mW Aging per year ( 25C) 5 PPM Maximum Soldering Temp / Time 260C / 10 Seconds x 2 Moisture Sensitivity Level (MSL) per 1 J-STD-033 Termination Finish Au over Ni Seal Method Resin Lead (Pb) Free Yes RoHS Compliant Yes Frequency Range (MHz) Operating Mode Max ESR 6.000 ~ 7.999 Fundamental 80 8.000 ~ 9.999 Fundamental 60 10.000 ~ 15.999 Fundamental 50 16.000 ~ 50.000 Fundamental 40 rd 28.000 ~ 84.000 3 Overtone 60 th Note: Dimensional drawing is for reference to critical >84.000 ~ 160.000 5 Overtone 80 specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. AVAILABLE OPERATING TEMPERATURES AND STABILITIES* Operating Temperature 15 PPM 20 PPM 25 PPM 30 PPM 50 PPM -0C ~ +75C O O O O O -10C ~ +60C O O O O O -10C ~ +70C O O O O O -20C ~ +70C O O O O O -30C ~ +85C X O O O O -40C ~ +85C X O O O O Key: O = Available, X = Not Available, = Consult Fox Technical Support, *Does not imply a stocked part. Revised A: 10/24/2019 Page 1 of 2 www.foxonline.com 7.5mm x 5.0mm FC7AS Ceramic SMD Crystal (Former FE) TAPE SPECIFICATIONS (mm) REEL SPECIFICATIONS (mm) A B C D E F REEL QTY G H I J K L M 180 -T1 = 1,000 1.5 4.0 8.0 7.5 16.0 2.3 2.0 13 21 80 17.5 2.0 250 -T2 = 2,000 Default 1 Available Options & Part Identification for Ceramic SMD Crystal C7AS Sample PN: FC7ASCCL40.0-T2 -T2 F C7AS C C L M 40.0 Fox Model Tolerance Stability Load Operating Frequency Values Added 2 Number B = 50 PPM B = 50 PPM Capacitance Temperature (MHz) Options C = 30 PPM C = 30 PPM E = 10pF C = 0 to +70 C Blank = Bulk D = 25 PPM G = 12pF D = -10 to +60C T1 = 1,000 pcs E = 20 PPM J = 15pF E = -10 to +70 C T2 = 2,000 pcs F = 15 PPM L = 18pF F = -20 to +70C M = 20pF K = -30 to +85C M = -40 to +85 C 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 10/24/2019 Page 2 of 2 www.foxonline.com