7mm x 5mm FC7BA Auto Grade Crystal (Former FXA7050B) Features AEC Q200 Qualified IATF-16949 QMS Tolerances down to 10 PPM Stabilities down to 20 PPM STANDARD SPECIFICATIONS DIMENSIONS / MECHANICAL PARAMETERS MAX (Unless otherwise noted) SPECIFICATIONS Frequency Range 6.000 ~ 133.000 MHz Frequency Tolerance 25C (See options below) Frequency Stability, ref 25C (See options below) Temperature Range Operating (TOPR) (See options below) Storage (T ) -55C ~ +150C STG Shunt Capacitance (CO) 5 pF Load Capacitance (C ) (See options below) L Drive Level 100W Aging per year ( 25C) 5 PPM Maximum Soldering Temp / Time 260C / 10 Seconds x 2 Moisture Sensitivity Level (MSL) per N/A J-STD-033 Termination Finish Au (0.3~0.75m) over Ni (1.27~8.89m) Seal Method Seam Lead (Pb) Free Yes RoHS Compliant Yes, no exemptions REACH Compliant (latest version) Yes Frequency Range (MHz) Operating Mode Max ESR 6.000 ~ 7.999999 Fundamental 70 8.000 ~ 9.999999 Fundamental 40 10.000 ~ 14.999999 Fundamental 35 15.000 ~ 39.999999 Fundamental 30 40.000 ~ 50.000 Fundamental 20 RD 50.001 ~ 79.999999 3 OT 70 RD 80.000 ~ 133.000 3 OT 60 Note: Dimensional drawing is for reference to critical specifications defined by size measurements. AVAILABLE OPERATING TEMPERATURES AND STABILITIES Operating Temperature 20 PPM 25 PPM 30 PPM 50 PPM 100 PPM -40C ~ +85C O O O O O -40C ~ +105C X X O O O -40C ~ +125C X X X O O -55C ~ +125C X X X O O Key: O = Available, X = Not Available Revised A: 07/21/2020 Page 1 of 2 www.foxonline.com 7mm x 5mm FC7BA Auto Grade Crystal (Former FXA7050B) TAPE SPECIFICATIONS (mm) REEL SPECIFICATIONS (mm) A B C D E F REEL QTY G H I J K L M -T2 = 2,000 1.55 4.0 8.0 7.5 16.0 2.0 2.5 13 21 62 180 17 2.0 -T1 = 1,000 1 Available Options & Part Identification for Auto Grade Crystal C7BA Sample PN: FC7BABCVI40.0-T1 -T1 F C7BA B C V I 40.0 Fox Model Tolerance Stability Load Operating Frequency Values Added 2 Number B = 50 PPM A = 100 PPM Capacitance Temperature (MHz) Options C = 30 PPM B = 50 PPM V = 7pF M = -40 to +85C Blank = Bulk D = 25 PPM C = 30 PPM D = 8pF P = -40 to +105C T1 = 1,000 pcs E = 20 PPM D = 25 PPM E = 10pF I = -40 to +125C T2 = 2,000 pcs F = 15 PPM E = 20 PPM G = 12pF T = -55 to +125C H = 10 PPM J = 15pF K = 16pF L = 18pF M = 20pF 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 07/21/2020 Page 2 of 2 www.foxonline.com