1.2mm x 1.0mm Ceramic SMD Crystal FCABS Features Tolerances down to 10 PPM Stabilities down to 10 PPM Temperature Ranges as wide as -40C to +85C STANDARD SPECIFICATIONS DIMENSIONS / MECHANICAL PARAMETERS MAX (Unless otherwise noted) SPECIFICATIONS Frequency Range 32.000 ~ 80.000 MHz Frequency Tolerance 25C (See options below) Frequency Stability, ref 25C (See options below) Temperature Range Operating (T ) (See options below) OPR Storage (T ) -55C ~ +125C STG Shunt Capacitance (C ) 2 pF O Load Capacitance (CL) (See options below) Drive Level 100W (10W Typical) Aging per year ( 25C) 3 PPM Maximum Soldering Temp / Time 260C / 10 Seconds x 2 Moisture Sensitivity Level (MSL) per N/A J-STD-033 Termination Finish Au (0.3~1m) over Ni (1.27~8.89m) Lead (Pb) Free Yes RoHS Compliant Yes, no exemptions REACH Compliant (latest version) Yes Frequency Range (MHz) Operating Mode Max ESR 32.000 ~ 32.999999 Fundamental 100 33.000 ~ 36.999999 Fundamental 80 37.000 ~ 80.000 Fundamental 60 AVAILABLE OPERATING TEMPERATURES AND STABILITIES Operating Temperature 10 PPM 15 PPM 20 PPM 25PPM -20 ~ +70C O O O O Note: Dimensional drawing is for reference to critical -30 ~ +85C X O O O specifications defined by size measurements. Certain -40 ~ +85C X O O O non-critical visual attributes, such as side castellations, Key: O = Available, X = Not Available etc. may vary. Revised A: 07/23/2020 Page 1 of 2 www.foxonline.com 1.2mm x 1.0mm Ceramic SMD Crystal FCABS TAPE SPECIFICATIONS (mm) REEL SPECIFICATIONS (mm) A B C D E F REEL QTY G H I J K L M 1.5 4.0 4.0 3.5 8.0 0.45 -T5 = 5,000 2.0 13 21 60 180 9.0 1.5 1 Available Options & Part Identification for CABS Sample PN: FCABSFFDM40.0-T5 -T5 F CABS F F D M 40.0 Fox Model Tolerance Stability Load Operating Frequency Values Added 2 Number D = 25 PPM D = 25 PPM Capacitance Temperature (MHz) Options E = 20 PPM E = 20 PPM B = 6 pF F = -20 ~ +70C Blank = Bulk F = 15 PPM F = 15 PPM V = 7 pF K = -30 ~ +85C T5 = 5,000 pcs H = 10 PPM H = 10 PPM D = 8 pF M = -40 ~ +85C E = 10 pF G = 12 pF 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2 Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact us for assistance Reliability Test Conditions Please contact Abracon Quality Assurance department Revised A: 07/23/2020 Page 2 of 2 www.foxonline.com