7x5mm LVDS Oscillator O7LS (former F4700, F4710 Series) DATASHEET LVDS Output Stabilities to 20 PPM Temperature Ranges as wide as -40C to +85C Supply Voltages: 2.5V, 3.3V Specifications PARAMETERS MAX (unless otherwise noted) Frequency Range 25.0 ~ 400.0 MHz Storage Temperature Range (TSTG) -55 ~ +125C Supply Voltage (V ) DD 2.5V10% 3.3V10% Input Current (IDD) 63 mA Standby Current 30 A Output Symmetry (50% V ) 45% ~ 55% P-P Rise Time (20%~80% VP-P) 0.5 nS Fall Time (80%~20% V ) 0.5 nS P-P Differential Output Voltage (VOD) 0.247V ~ 0.454V Differential Offset Voltage (V ) 1.125V ~ 1.375V OS Output Load 100 Ohms Typical Start-up Time (T ) 10 mS S 1 200 nS Output Disable Time 1 Output Enable Time 10 mS Aging (per year 25C) 3 PPM Phase Jitter (12kHz~20MHz) 1 pS Enable/Disable Function Pin1 Out 1 (pin 4), Out 2 (pin 5) 1 Active OPEN 1 Level V 70%V Active IH DD High Z 0 Level V 30%V IL DD Available Options by Stability & Operating Temp . Frequency Operating Frequency Range (MHz) Stability Temperature (C) 2 100PPM -20 ~ +70 25.0 ~ 400.0 2 25.0 ~ 400.0 100PPM -40 ~ +85 2 -20 ~ +70 25.0 ~ 400.0 50PPM 2 25.0 ~ 400.0 -40 ~ +85 50PPM 2 25.0 ~ 400.0 25PPM -20 ~ +70 3 25PPM -40 ~ +85 25.0 ~ 400.0 3 25.0 ~ 400.0 20PPM -20 ~ +70 1 An internal pull-up resistor from pin 1 to pin 4 allows active output if pin 1 is left open 2 Inclusive of 25C tolerance, operating temperature range, input voltage change, load change, reflow, one-year aging, shock, and vibration. 3 Inclusive of 25C tolerance, operating temperature range. Title / Description: O7LS SERIES STANDARD SPECIFICATIONS Drawing Number: O7LS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: MAJ Approved: BEC Revision Date: 07/31/2019 Copyright 2019 Fox Electronics. All rights reserved. 7x5mm LVDS Oscillator O7LS (former F4700, F4710 Series) DATASHEET Maximum Soldering Temp / Time 260C / 10 Seconds x2 Moisture Sensitivity Level (MSL) 1 Termination Finish Au over Ni Seal Method Seam Lead (Pb) Free Yes ROHS/REACH Compliant Yes Notes: *A 0.01F capacitor should be placed between V (Pin 6) and GND (Pin3) to minimize power supply line noise. DD *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary. Title / Description: O7LS SERIES STANDARD SPECIFICATIONS Drawing Number: O7LS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: MAJ Approved: BEC Revision Date: 07/31/2019 Copyright 2019 Fox Electronics. All rights reserved.