HWZT-RS LOW PROFILE LEADED CERAMIC RESONATOR RoHS/RoHS II Compliant HWZT-RS 5.5 x 3.0 x 5.0mm Pb in ceramic, exemption (7c-I) FEATURES: APPLICATIONS: Clock oscillation for microcontrollers Low resonant impedance Telephones Small size, Light weight. Low cost timing solution . Household electric appliances STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes Frequency Range 8.00 12.50 MHz Resonant Impedance (Ro) 25 Frequency Tolerance -0.5 +0.5 % Frequency Stability -0.3 +0.3 % -25C to +85C Withstanding Voltage 100 Vdc 5 secs D.C. Voltage 6 Vdc Rating Voltage A.C. Voltage 15 Vp-p. Load Capacitance 24 30 36 pF Insulation Resistance 500 M 10Vdc, 1min Operation Temperature -25 +85 C Storage Temperature -40 +85 C Aging Rate (Fosc) -0.3 0.3 % From initial value TEST CONDITION AND TEST CIRCUIT: Parts shall be measured under a condition (Temp.: 2015C, Humidity: 6520% R.H.) unless the standard condition (Temp: 253C, Humidity: 6510% R.H.) is regulated to measure X: Ceramic Resonator C1=C2=30pF20% OPTIONS & PART IDENTIFICATION: HWZT - RS - Packaging Frequency Blank: Bulk A: AMMO package* Frequency in MHz *AMMO package lead length 13.5mm REVISED: 03.01.2017 5101 Hidden Creek Lane Spicewood ABRACON IS Phone: 512-371-6159 Fax: 512-351-8858 ISO9001-2008 For terms and conditions of sale please visit: LLC CERTIFIED www.abracon.comHWZT-RS LOW PROFILE LEADED CERAMIC RESONATOR HWZT-RS RoHS/RoHS II Compliant 5.5 x 3.0 x 5.0mm Pb in ceramic, exemption (7c-I) OUTLINE DRAWING: Bulk Pack AMMO Pack Dimension: mm Packaging: Bulk: 500pcs/plastic bag AMMO: 2000pcs/box Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prod- uct will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability. CAUTION (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high- reliabilit, y life dependant applications. ContactAbracon Corporation prior to using this product when in doubt. ATTENTION: Abracon LLC products are COTS Commercial-Off-The-Shelf products suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracons products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon is required. Please contact Abracon for more information. REVISED: 03.01.2017 5101 Hidden Creek Lane Spicewood TX 78669 Phone: 512-371-6159 Fax: 512-351-8858 ABRACON IS ISO9001-2008 For terms and conditions of sale please visit: LLC CERTIFIED www.abracon.com