MEMS Oscillator, Low Power, LVCMOS/HCMOS Compatible, 1.000 MHz to 110.000 MHz IM801 Series Features: Typical Applications: MEMS Technology Fibre Channel Direct pin to pin drop-in replacement for industry-standard packages Server and Storage LVCMOS/HCMOS Compatible Output GPON, EPON Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2 mm x mm 100M / 1G /10G Ethernet Pb-free, Halogen-free, Antimony-free RoHS and REACH compliant Fast delivery times Electrical Specifications: Frequency Range 1.000 MHz to 110.000MHz Inclusive of Initial Tolerance, Operating Temperature Range, Load, Frequency Stability See Part Number Guide Voltage, and Aging Operating Temperature See Part Number Guide Supply Voltage (Vdd) 10% See Part Number Guide 3.8 mA typ./ 4.5 mA max No load condition, F = 20 MHz, Vdd = +2.8 V to +3.3 V Current Consumption 3.7 mA typ./ 4.2 mA max No load condition, F = 20 MHz, Vdd = +2.5 V 3.5 mA typ./ 4.1 mA max No load condition, F = 20 MHz, Vdd = +1.8 V 4.2 mA max Vdd = +2.5 V to +3.3 V, OE = GND, Output in high-Z state OE Disable Current 4.0 mA max Vdd = +1.8 V, OE = GND, Output in high-Z state 2.1 A typ./ 4.3 A max ST = GND, Vdd = +2.8 V to +3.3V Standby Current 1.1 A typ. / 2.5 A max ST = GND, Vdd = +2.5 V 0.2 A typ. / 1.3 A max ST = GND, Vdd = +1.8 V Waveform Output LVCMOS / HCMOS Symmetry 45%/55% 50% of waveform all Vdds 1.0 nSec typ./ 2.0 nSec max Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V from 20% to 80% of waveform Rise / Fall Time 1.3 nSec typ./ 2.5 nSec max Vdd = +1.8 V from 20% to 80% of waveform Logic 1 90% of Vdd min Logic 0 10% of Vdd max Input High Voltage 70% of Vdd min Pin 1, OE or ST Input Low Voltage 30% of Vdd max Pin 1, OE or ST 50k min / 87k typ. 150k max Pin 1, OE logic high or logic low or ST logic high Input Pull-up Impedance 2.0M min Pin 1, ST logic Low Startup Time 5.0 mSec max Measured from the time Vdd reaches its rated min value Enable/Disable time 130 nSec max F = 110 Mhz. For other frequencies, T oe =100 nSec = 3 cycles Resume Time 5.0 mSec max Measured from the time ST pin crosses 50% threshold 1.8pSec typ./ 3.0pSec max F = 75 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V RMS Period Jitter 1.8pSec typ./ 3.0pSec max. F = 75 MHz, Vdd = +1.8 V 12.0 pSec typ./ 25.0 pSec max F = 75 MHz, Vdd = +2.5 V, +2.8 V, + 3.0 V or +3.3 V Peak-to-peak Period Jitter 14.0 pSec typ./ 30.0 pSec max F = 75 MHz, Vdd = +1.8 V 0.5pSec typ./ 0.9 pSec max F = 75 MHz, Integration Bandwidth = 900 kHz to 7.5 MHz RMS Phase Jitter (random) 1.3pSec typ./ 2.0pSec max F = 75 MHz, Integration Bandwidth = 12 kHz to 20.0 MHz Notes: All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated. Typical values are at +25C and nominal supply voltage. Absolute Maximum Limits Storage Temperature -65C to +150C Supply Voltage (Vdd) -0.5 VDC to 4.0 VDC Electrostatic Discharge 2000 V max Solder Temperature (follow standard Pb free soldering guidelines) 260C max Junction Temperature 150C max Rev: 01/30/16 A ILSI America Phone 775-851-8880 Fax 775-851-8882 email: e-mail ilsiamerica.com www.ilsiamerica.com Specifications subject to change without notice Page 1 of 9 MEMS Oscillator, Low Power, LVCMOS/HCMOS Compatible, 1.000 MHz to 110.000 MHz IM801 Series Ordering Information: Part Number Guide Output Drive Stability Packages Input Voltage Operating Temperature Select Function Frequency Strength (ppm) IM801B 5.0 x 3.2 1 = +1.8 V 1 = 0C to +70C - = Default F = 20 H = Tri-State IM801C 3.2 x 2.5 6 = +2.5 V 2 = -40C to +85C (see tables 2 A = 25 S = Standby IM801D 2.5 x 2.0 2 = +2.8 V 3 = -20C to +70C through 6) B = 50 O = N/C - Frequency IM801E 2.0 x 1.6 7 = +3.0 V 3 = +3.3 V Sample Part Number: IM801C-62-FS-20.0000MHz This 20.0000 MHz oscillator in a 3.2 x 2.5 package with stability 20 ppm from -40C to +85C using a supply voltage of +2.5 V. The Output Drive Strength (Rise and Fall Time) is the default value 1.0 nSec per Table 3 with 15 pF load. With Pin 1 function as Standby Sample Part Number: IM801D-71RAO-66.0000MHz This 66.0000 MHz oscillator in a 2.5 x 2.0 package with stability 25 ppm from 0C to +70C using a supply voltage of +3.0 V. The Output Drive Strength (Rise and Fall Time) is the R drive strength is 4.54 nSec per Table 5 with 30 pF load. With Pin 1 function is not connected Notes: Not all options are available at all frequencies and temperatures ranges. Please consult with sales department for any other parameters or options. Oscillator specification subject to change without notice. Test Circuit Waveform Rev: 01/30/16 A ILSI America Phone 775-851-8880 Fax 775-851-8882 email: e-mail ilsiamerica.com www.ilsiamerica.com Specifications subject to change without notice Page 2 of 9