Sync n Go -- Portable Precision Frequency Reference SYNC-10.00MHz. RoHS Pb Compliant FEATURES: APPLICATIONS: Stand Alone 10.00MHz Portable Precision Frequency Reference Ideally suited as an in-field Calibrated Precision 10.00MHz reference - World Wide Capability for trouble shooting or tuning hardware and Base Station related Built-in Stratum-III stability, 10.00MHz Signal tuned into 50 s Synchronization equipment circuitry providing dynamic sync capability, enabling Calibration to a known Reference source for lab use source such as a GPS Tracked 10.00MHz reference/10.00MHz Rubidium Reference source to drive frequency counters and other timing related Source/10.00MHz OCXO based reference hardware or instruments Integrated re-chargeable batteries to provide true stand-alone capability in the field Precision Portable reference for inspection of in-field wireless Once sync d guaranteed 300 ppb stability over 0C to 60C transmitters Pocket Size - 3.50 * 1.50 * 1.00 machined aluminum durable enclosure Accompanied with a Universal AC-DC Charger Continuously operable at full charge for 10-hours STANDARD SPECIFICATIONS: Parameter Description Value / Units Input Reference Frequency for Sync 10.00 MHz Output Reference Frequency 10.00 MHz Operable Operating Range 0C to +60C Synchronization accuracy 5.00 ppb Frequency Drift post sync 25.00 ppb Typical (25C 10C) Frequency Drift post sync 50.00 ppb Typical (25C 20C) Frequency Accuracy Over the < 100 ppb Typical Post Sync operating Temperature Range 300 ppb Maximum Post Sync Load Impedance 50 Charging Time 4.00 Hours maximum Stand Alone operational time with 10.00 Hours minimum full charge Phase Noise 10.00MHz Carrier 100 Hz offset -120 dBc/Hz typical 1,000 Hz offset -140 dBc/Hz typical 10,000 Hz offset -150 dBc/Hz typical 100,000 Hz offset -155 dBc/Hz typical 1,000,000 Hz offset -155 dBc/Hz typical Output amplitude 6.0 dBm minimum ALL Harmonics -30 dBc maximum rms jitter < 0.50 ps 12kHz to 20MHz BW from the carrier PACKAGE OUTLINE Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.02.11 ABRACON IS ABRACON IS ISO9001:2008 30332 Esper anza, Ranch o Sant a Margarit a, California 92688 CERTIFIED CERTIFIED tel 949-546-8000 fax 949-546-8001 www . abraco n.co m Sync n Go -- Portable Precision Frequency Reference SYNC-10.00MHz. RoHS Pb Compliant OPERATIONAL MANUAL Charge: 1) Plug 5V charger (or PC or any other USB power source) into a mini-USB port 2)Ba LED may turn yellow for a moment to signal that an internal battery is evaluated 3)Ba LED will flash green to signal that the battery is being charged 4)Ba LED will display solid green when the battery is fully charged Synchronization: 1) Connect a 10MHz standard to theRef I input 2) PressSynchroniz 3)Loc LED will turn-on yellow to signal thatSync N G is evaluating the standard 4) If the reference is stable, theLoc LED will turn green to signal that the signal is locked and that the reference information is stored 5) If the reference is not found or it is outside a frequency range or it is not stable, the Loc LED will flash red 6) If that occurs, theLoc LED turns-off and theSync N G goes into a sleep mode Output ON (if battery charged): 1) PressPowe 2)O LED will turn green 3)Sync N G will output a continuous RF signal on theOu connector Output ON (if battery low): 1) PressPowe 2)O LED will turn green. 3)Sync N G will output a continuous RF signal on theOu connector. At the same time,Ba LED will slowly flash red. Output ON (if battery is discharged): 1) PressPowe 2)Ba LED will rapidly flash red for few seconds andSync N G will immediately go back to sleep Output OFF: 1) PressPowe 2)O LED turns off and theSync N G goes into a sleep mode ATTENTION: Abracon Corporations products are COTS Commercial-Off-The-Shelf products suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracons products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Designed & Manufactured in United States For technical assistance, please contact: techsupport abracon.com Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.02.11 ABRACON IS ABRACON IS ISO9001:2008 30332 Esper anza, Ranch o Sant a Margarit a, California 92688 CERTIFIED CERTIFIED tel 949-546-8000 fax 949-546-8001 www . abraco n.co m