AC-98CD2.1APBMX AC Electronics

Constant Current LED Driver Model Number AC-98CD2.1APMX AC-98CD2.1APBMX AC-98CD2.1APMY Programmable, Input Voltage: 120-277V Digital, Wide-Range Input Frequency: 50/60Hz Ajustable Current & Dimming Side and Bottom Mount/Leads Options ELECTRICAL SPECIFICATIONS: < 1 Sec. Start time/(Starting with batch code AKT.48) Output Min PF Max T Min, Input Input Output Output Efcifi ency IP Dimming Dimming Power (full THD (full case Starting Power Current Voltage Current Up To Rating Protocol Range Range load) load) Max Temp** 0.94A 120V, 1050 to 10 to 64 0 to 10V 98W 113W >0.9 <20% 27-55V 90C -40C 88% 100% 0.41A 277V 2100mA ** This driver can operate down to -40C in a non-dimming PHYSICAL: condition. Below 0C some ficker may be observed. WIRING: Bottom Mount Hot Spot Model No: AC-98CD2.1APBMX Use with NFC-V Reader App Available Free at Google App Store Dimensions Length Width Height Mounting AC-98CD2.1APMX 9.5 2.4 1.46 8.9 Lead Lengths AC-98CD2.1APBMX 9.5 2.4 1.46 8.9 Black 5.9 Blue 5.9 Purple 7.1 AC-98CD2.1APMY 15.55 1.49 1.14 15.23 White 5.9 Red 5.9 Gray 7.1 SAFETY: The LED Driver Type TL Program LED driver has a life expectancy of Surge Protection (3 KV) is intended to assist you in gaining 100,000 hours at Tcase of 65C Class A sound rating greater market access for your LED Warranty: 5 yrs based on max case Overload Protection drivers. This service is also intended temp of <75C 3 yrs based on max Open/Short Circuit Protection to assist end-product LED Lumi- case temp of 90C* naire manufacturers improve their LED driver has a life expectancy speed-to-market by making it easy Input/Output Isolation of 50,000 hours at Tcase of to source a compliant LED Driver. FCC Title 47 CFR Part 15 75C INSTALLATION: Max Remote installation distance is 18 ft LED drivers shall be installed inside electrical enclosures LED driver cases should be grounded 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation *AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75C 3 years from date of manufacture when operated at a max case temp of up to 90C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy. E332747 Class 2 3401 Avenue D, Arlington, TX 76011 800-375-6355 www.aceleds.com RoHS Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary COMPLIANT depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted. LEAD -FREE 2018 Revised 02/28/2018AC-98CD2.1APMX AC-98CD2.1APBMX AC-98CD2.1APMY Phone Instructions First you must have a Android device (phone/tablet) with NFC-V app downloaded. Open App then place the device on top of the driver matching up sensors until it syncs up Basic format Write To Check: Read Insert the appropriate code from chart above Read Write Shows you the Block - 00 00 00 00 Successfully written will appear This is where the code you input appears Use with NFC-V Reader App Available Free at Google App Store IOUT/VOUT CURVE 60 55 50 45 40 35 30 25 20 15 10 5 0 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 Output Current A CONTROL THE IOUT WITH THE PROGRAMMING WAND. DOWNLOAD SOFTWARE FROM