Gemini-ESD Mat Static Dissipative Work Surface Material The Gemini ESD Mat is a dual-layer, static dissipative, polymer-based material made for bench tops and other grounded workbench sur- faces. Polymers used in this material are homogeneously dispersed with an anti-static formula, leaving a permanent surface and volume resistance that will conform to the most stringent ESD requirements. With a dissipative upper layer and a conductive base, this material is as durable as rigid laminates, and as comfortable and appealing as rubber. It is suitable for use with constant monitor systems. The extrusion process used in manufacturing allows for low outgas- sing and high durability. Layers are laminated during the molten Color shown is a representation and may vary stage of manufacturing to ensure a successful bond and long life. The electrical properties will not wear away or exudate. Maintenance: The Gemini-ESD Mat will deliver a typical resistance-to-ground mea- To keep mats clean and avoid insulative surement of 10e6 -10e8 ohms per ANSI/ESDA S4.1. This material electrical readings, use a neutral cleaner complies with industry standards including EN 61340-5-1: Protection of Electronic Devices from Electrostatic Phenomena and ANSI / ESDA such as the 6001 Mat and Table Top S20.20: Protection of Electrical and Electronic Parts, Assemblies and Cleaner. The low alcohol, high surfactant Equipment. formula will allow deep cleaning without 0.065 (1.65 mm) thickness damaging the structural integrity of the Gemini-ESD mat. 6 8 10 - 10 ohms, ohm per cm RTG, RTT, Vol R Gemini-ESD Mat roll Can be custom-cut with sharp blade scraps are recyclable 58200 Light Gray 24 x 50 Embossed finish reduces light glare and parts slippage 58400 Light Gray 30 x 50 58600 Light Gray 36 x 50 Durable surface withstands high temperatures, solder, flux, and 59100 Royal Blue 24 x 50 harsh chemicals 59300 Royal Blue 30 x 50 Low outgassing and VOC are ideal for controlled environments 59500 Royal Blue 36 x 50 Passes weathering ozone resistance per ASTM D178-01 Gemini-ESD cut mats are available in various Passes and exceeds minimum standards for NFPA fire and sizes. Each mat includes two 10mm female smoke safety ground snaps. Ground cords sold separately. UV additives to protect color and eliminate fading The components used to manufacture this Warranty: product, including smoke and flame inhibitors, ACL Inc., offers an exclusive lifetime warranty on the electrical resistance are RoHS compliant and are not listed on the 6 8 (10 10 ohms) properties of our Gemini table mats. If the electrical REACH SvHC list. properties should fail (when tested to ANSI / ESD S20.20) on any of our table mats during the lifetime of the mat due to manufacturing or physical defects, Rolls and cut mats are made in the U.S.A. and we will replace the mat free of charge. can be shipped under NAFTA rules. This warranty does not apply to mats that are abused, improperly used, or cleaned with mat cleaners not tested and approved by ACL Inc. ACL Inc. registered to ISO-9001 : 2008 840 W. 49th Place Chicago, IL 60609 Certificate N0. 10002746 800.782.8420 847.981.9212 fax 847.981.9278 info aclstaticide.com www.aclstaticide.com rev. December 3, 2015 mkbFor Gemini ESD Thickness: BULK roll manufacturer part numbers: 58200 Light Gray - 24 x 50 58400 Light Gray - 30 x 50 58600 Light Gray - 36 x 50 59100 Royal Blue - 24 x 50 59300 Royal Blue 30 x 50 59500 Royal Blue 36 x 50 PRECUT SIZE manufacturer part numbers: 5822436 Light Gray 24 x 36 5822448 Light Gray 24 x 48 5822460 Light Gray 24 x 60 5822472 Light Gray 24 x 72 5843060 Light Gray 30 x 60 5843072 Light Gray 30 x 72 5863660 Light Gray 36 x 60 5863672 Light Gray - 36 x 72 5912436 Royal Blue 24 x 36 5912448 Royal Blue 24 x 48 5912460 Royal Blue 24 x 60 5912472 Royal Blue 24 x 72 5933060 Royal Blue 30 x 60 5933072 Royal Blue 30 x 72 5953660 Royal Blue 36 x 60 5953672 Royal Blue 36 x 72