Shenzhen Normand Electronic Co.,Ltd SK9822 SPECIFICATION INTEGRATED LIGHT SOURCE INTELLIGENT CONTROL (Double line transmission) OF CHIP-ON-TOP SMD TYPE LED Document No.: SPC/ SK9822 Model No.: SK9822 Description: 5.5x5.0x1.6mm Top SMD Type 0.2Watt Power Double line transmission tegrated light source Intelligent control LED Rev. No.: 01 Date: 2016-03-18 ELECTROSTATIC SENSITIVE DEVICES Document No.: SPC / SK9822 Rev. No.: 01 1/ 12 www.normandled.comShenzhen Normand Electronic Co.,Ltd INTEGRATED LIGHT SOURCE INTELLIGENT CONTROL (Double line transmission) OF CHIP-ON-TOP SMD TYPE LED Model: SK9822 1. Product Overview : SK9822 is a two-wire transmission channel three (RGB) driving intelligent control circuit and the light emitting circuit in one of the LED light source control. Products containing a signal decoding module, data buffer, a built-in constant current circuit and RC oscillator CMOS, low voltage, low power consumption 256 level grayscale PWM adjustment and 32 brightness adjustment use the double output, Data and synchronization of the CLK signal, connected in series each wafer output action synchronization. 2. Main Application Field: Full color LED string light, LED full color module, LED super hard and soft lights, LED guardrail tube, LED appearance / scene lighting LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc.. 3. Description: Top SMD internal integrated high quality external control line serial cascade constant current IC 5V application default on electric lights Control circuit and the RGB chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency The two-wire synchronous control. The three RGB output control, 8Bit (256) color 5Bit (32) to adjust the brightness The three constant current drive, self detection function specific signal The maximum frequency of 30MHZ serial data input The double data transmission, built-in support uninterrupted oscillation PWM output, can maintain a static image. 4. Mechanical Dimensions: Notes: 1. All dimensions are in millimeters. 2. Tolerance is 0.1mm unless otherwise noted Document No.: SPC / SK9822 Rev. No.: 01 2/ 12 www.normandled.com