2773 Adafruit

Kendall ECG Electrodes Product Data Sheet Arbo H124SG Ref. Code: 31.1245.21 1. BASiC PRoDuCt infoRmA tion 5. PACKAGinG Shape / size (excl. grip) Round / 24 mm L x W x H (mm) Content (electrodes) Material 2 Total product surface (excl. grip) 452 mm Product packaging (pouch) 220 x 180 50 Paper / PE / Alu / PE 2 Gel area 201 mm Department packaging (box) 194 x 194 x 240 500 Paper cardboard 2 Adhesive area 251 mm Transport packaging (carton) 600 x 400 x 510 6000 Paper cardboard 2 Sensor area 80 mm Product thickness (adapter excluded) 1 mm Adapter Stud 6. BioComPA tiBility Integrated lead wire (length / colour) Test acc. to DIN ISO 10993 passed LATEX content no 2. mAtERiAlS infoRmA tion Backing material Polyethylene foam (PE), white 7. EnviRonmEnt (detailed information related to product Adhesive characteristics Medical grade pressure sensitive adhesive and packaging see Environmental Declaration) Gel characteristics Conductive and adhesive hydrogel Halogenated hydrocarbon content (e.g. PVC) no Supporting / back label Polypropylene film (PP) transparent Phthalate derivatives content (e.g. DEHP) no Release liner Polyethylene film (PE), one side siliconized RoHS directive in compliance Sensor Polymer Ag/AgCl coated Adapter / connector Stainless steel Integrated lead wire jacketing 8. SHElf lifE Integrated lead wire cord Product shelf life in an intact, originally sealed packaging 24 months 10 30 C 3. El ECtRiCAl CHARACtERiStiCS 9. lEGAl St AtuS (AnSi/AAmi EC 12, average measured before packaging) CE Mark according to MDD 93/42/EEC CE marked ACZ I impedance (before defibrillation simulation) 220 Ohm DC offset voltage (before defibrillation simulation) 0.2 mV SDR (remaining potential after defibrillation simulation) 11 mV Slope (potential decline after defibrillation simulation) 0.2 mV/s COIIN (combined offset instability and inner noise) 4 V Bias current tolerance (DC offset voltage after DC loading) 6 mV 4. SPECiAl fEA tuRES MRI compatibility (< 3T) no X-ray translucence no Disclaimer: Specifications and other information presented in this Peel off resistance, max. (from PE foil, 180 , 50 mm/min, ASTM D1876) 2.5 N document are for information purpose only and do not provide Integrated abrader no any recommendation or advise of any kind. Data may differ from Repositionability no actual values quoted here and Tyco / Covidien does not make any warranties or representations to any characteristics. Subject to changes without notice. COVIDIEN, COVIDIEN with logo and marked brands are trademarks of Covidien AG or an affiliate. 2008 Covidien AG or an affiliate. All rights reserved. 31124521e2008-10-06 TY0648 MED 2009 PM 0013 Covidien (UK) Commercial Ltd +44 (0) 1329 224226/224411 t www.covidien.com 154 Fareham Road +44 (0) 1329 224334/224390 f Gosport Hampshire PO13 0AS uksales covidien.com e United KingdomX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Adafruit Accessories category: Click to view products by Adafruit manufacturer: Other Similar products are found below : 3209 3561 3560 3562 2503 3011 3048 2973 2868 2958 2836 2968 3610 3568 3551 2858 3353 3584 3484 2865 3556 3559 3262 3348 2499 2878 2963 3219 3005 2882 PGM1202 02-LDR1 02-LDR12 02-LDR13 02-LDR14 02-LDR15 02-LDR2 02-LDR3 02-LDR4 2194 862 460 905 02-LDR20 02-LDR21 02-LDR22 02-LDR23 1008 1020 1031