Technical Specifications Cheetah 3D Printing Filament Flexible Polyurethane Material for FDM Printers Cheetah flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market. General Properties Test Method Imperial Metric Specific Gravity ASTM D792 1.22 g/cc 1.22 g/cc Moisture Absorption - 24 hours ASTM D570 0.18 % 0.18 % Mechanical Properties Tensile Strength, Yield ASTM D638 1,250 psi 9 Mpa Tensile Strength, Ultimate ASTM D638 5,650 psi 39 Mpa Tensile Modulus ASTM D638 3,800 psi 26 Mpa Elongation at Yield ASTM D638 55% 55% Elongation at Break ASTM D638 580% 580% 3 3 6 Toughness (integrated stress-strain curve calculated stress x strain) ASTM D638 17,000 inlbF/in 117.2 m*N/m x10 Hardness ASTM D2240 95 Shore A 95 Shore A 2 2 Impact Strength (notched Izod, 23C) ASTM D256 9.1 ft.lbf/in 19.1 kJ/m Abrasion Resistance (mass loss, 10,000 cycles) ASTM D4060 0.06 g 0.06 g Thermal Properties Melting Point (via Differential Scanning Calorimeter) DSC 428 F 220 C Glass Transition (Tg) DSC -11 F -24 C Heat Deflection Temperature (HDT) 10.75psi/ 0.07 MPa ASTM D648 165 F 74 C Heat Deflection Temperature (HDT) 66psi/ 0.45 MPa ASTM D648 120 F 49 C NinjaTek filament is capable of being printed by a variety of printers in a variety of configurations. This specification sheet gives results as they pertain to the defined test standard and specimen details. Different slicing and/or printing configurations, test conditions, ambient environments, etc. may result in dif ferent results. Impact Strength and Heat Deflection Temperature results were both provided by an accredited university testing laboratory. Specific Gravity and Hardness are innate characteristics of the material. Moisture Absorption, values associated with the Tensile Strength tests, Melting Point and Glass Transition data were prepared by Fenner Drives, Inc. NinjaTek makes no warranties of any type, express or implied, including, but no liited to, the warranties of fitness for a partuclar application. Impact (D256): Un-notched test specimen, Test Specimen Details (by ASTM Test Number) Tensile (D638): Dogbone Style IV, 100% fill, diagonal line fill. notch added post print by testing facility. All printed specimens were created using the TAZ5 printer 0.75mm nozzle. Dimensions: 5mm thick. See drawing for other dimensions. For ASTM D638 tests, the extrusion multiplier is 1.05. Dimensions: 2.5 L x 0.25 H x 0.5 W Specific Gravity (D792): Results determined by nature of material. Abrasion (D4060): Rectanglar block sized to fit tabor abrader. Dimensions: Moisture (D570): 30g of filament tested in moisture analyzer evaluated at all dimensions in mm. 5 L x 0.5 H x 0.5 W 125C until the mass change is < 0.005% over 1 minute. HDT (D648): Bar shape. Hardness (D2240): Solid testing block. Dimensions: Dimensions: 7.5 L x 0.125 H x 0.5 W 2L x 2 H x 0.75 W NinjaTek.com +1-717-664-8254 support ninjatek.com 2016 04 NF MSPECX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for 3D Printer Filaments category: Click to view products by Adafruit manufacturer: Other Similar products are found below : PLA17GR25 MC002547 MC002548 MC002549 MC002550 MC002551 MC002552 MC002553 MC002554 MC002555 MC002556 MC002558 MC002559 MC002561 MC002562 MC002563 MC011439 MC011440 MC011441 MC011442 MC011443 MC011444 MC011446 MC011447 MC011449 MC011450 MC011451 MC011452 MC011453 MC011455 MC011456 MC011457 MC011458 MC011459 MC011460 MC011461 MC011462 MC011463 MC011464 MC011465 MC011466 MC011468 MC011469 MC011470 MC011471 MC011472 MC011473 MC011474 MC011475 MC011476