578 Adafruit

SM CONNECTOR 2.5mm pitch/Disconnectable Crimp style wire-to-wire connectors Specifications Current rating: 3A AC, DC max. Voltage rating: 250V AC, DC max. Temperature range: -25C to +85C (including temperature rise in applying electrical current) Contact resistance: Initial value/10m max. After environmental testing/20m max. Insulation resistance: 500M min. Withstanding voltage: 1,500V AC/minute Applicable wire: AWG 28 to 22 2 0.08 to 0.33mm Applicable panel thickness: 0.5 to 2.0mm * Compliant with RoHS. * Refer toGeneral Instruction and Notice when using The SM series are 2.5mm pitch, Terminals and Connector at the end of this catalog. wire-to-wire connectors that perform * Contact JST for details. reliably in high-density, small current applications. Standards High contact pressure Recognized E60389 0 Highly reliable housing construction Certified LR20812 1 Mountable on a variety of panels R50120150 2 Arm lock mechanism Assembly layout Panel layout (2 to 12 circuits) Panel thickness (mm) 0.50.9 1.01.5 1.52.0 Circuits Plug housing Model No. Panel hole dimensions (mm) General tolerance 0.15 0.15 0.15 0.1 0.1 0.1 0 0 0 A B A B A B 2 5.7 9.6 5.7 9.8 5.7 10.0 SMP-02V-B(N)C 3 8.2 SMP-03V-B(N)C 12.1 8.2 12.3 8.2 12.5 4 SMP-04V-B(N)C 10.7 14.6 10.7 14.8 10.7 15.0 (18 circuits) 5 13.2 17.1 13.2 17.3 13.2 17.5 SMP-05V-B(N)C 6 15.7 19.6 15.7 19.8 15.7 20.0 SMP-06V-B(N)C 7 18.2 22.5 SMP-07V-B(N)C 22.1 18.2 22.3 18.2 8 SMP-08V-B(N)C 20.7 24.6 20.7 24.8 20.7 25.0 9 23.2 27.1 23.2 27.3 23.2 27.5 SMP-09V-B(N)C 10 25.7 29.6 25.7 29.8 25.7 30.0 SMP-10V-B(N)C 11 28.2 32.5 SMP-11V-B(N)C 32.1 28.2 32.3 28.2 12 SMP-12V-B(N)C 30.7 34.6 30.7 34.8 30.7 35.0 18 23.2 27.2 23.2 27.4 23.2 27.6 SMP-18V-B(N)C Note: 1. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. 1 circuits circuits 1 3456 7 10 12 13 14 15 18 JST 1 234 12 SM CONNECTOR Contact Pin contact Socket contact 15.8 1.7 2.0 Applicable wire Model No. Insulation O.D. Qty / reel Pin contact Socket contact 2 mm AWG (mm) 0.080.33 2822 1.21.8 SYM-001T-P0.6 SHF-001T-0.8BS Material and Finish Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Note: 1. Contact JST for special products. 2. Contact JST for brass products. Applicator Applicator Crimping Crimping Contact Contact machine Crimp applicator Crimp applicator with dies machine Crimp applicator Dies Crimp applicator with dies Dies SHF-001T-0.8BS SYM-001T-P0.6 * * Note: *Strip-crimp applicator Contact position location numbers Contact position numbers are stamped Receptacle housing Plug housing Receptacle housing Plug housing 1 1 2 2 1 10 10 1 3 3 2 11 11 2 4 4 3 12 12 3 5 5 4 13 13 4 6 6 5 14 14 5 7 7 6 15 15 6 8 8 7 16 16 7 9 9 8 17 17 8 10 10 9 18 18 9 11 11 12 12 2 0.64 1.1 JST 12 11 4 3 2 1 9 5 4 1 18 15 14 13 10 JST