ACL-10137-2MM ADLINK Technology

High-Speed DIO PCI/PCIe-7200 12 MB/s High-Speed 32-CH DI & 32-CH DO Cards Introduction ADLINKs PCI/PCIe-7200 are high-speed digital I/O cards consisting of 32 digital input channels, and 32 digital output channels. High-performance designs and the state-of-the-art technology make these cards suitable for high-speed data transfer and pattern generation applications. The PCI/PCIe-7200 performs high-speed data transfers using bus-mastering DMA via 32-bit PCI bus architecture. PCI-7200 The maximum data transfer rates can be up to 12 MB per second. Several digital I/O transfer modes are supported, such as direct programmed I/O control, timer pacer control, external clock mode and handshaking mode. They are very suitable for interfacing high-speed peripherals with your computer system. PCIe-7200 General Specifications Features Pin Assignment I/O connector Supports a 32-bit 5 V PCI bus (PCI-7200) PCI/PCIe-7200 x1 lane PCI Express interface (PCIe-7200) -37-pin D-sub female PCI/PCIe-7200 32-CH TTL digital inputs and 32-CH TTL digital outputs -40-pin Header Up to 12 MB/s transfer rate CN1 Operating temperature: 0C to 60C Bus-mastering DMA for both digital inputs and outputs DI16 1 2 DO16 Storage temperature: -20C to 80C Onboard programmable timer pacer clock DI17 3 4 DO17 Relative humidity: 5% to 95%, non-condensing Supports handshaking digital I/O transfer mode DI18 5 6 DO18 Power requirements Multiple programmable interrupt sources DI19 7 8 DO19 5 V power available on connectors Device Power Consumption DI20 9 10 DO20 Compact, half-size PCB (PCI-7200/PCIe-7200) 5 V 720 mA typical PCI-7200 DI21 11 12 DO21 Operating Systems DI22 13 14 DO22 12 V 200 mA PCIe-7200 Windows 7/Vista/XP/2000/2003 Server DI23 15 16 DO23 3.3 V 500 mA Linux DI24 17 18 DO24 Dimensions (not including connectors) DI25 19 20 DO25 Recommended Software 148 mm x 102 mm (PCI/PCIe-7200) DI26 21 22 DO26 AD-Logger DI27 23 24 DO27 VB.NET/VC.NET/VB/VC++/BCB/Delphi DI28 25 26 DO28 Terminal Boards & Cables DAQBench DI29 27 28 DO29 PCI/PCIe-7200: Driver Support DI30 29 30 DO30 DIN-37D-01 DAQPilot for LabVIEW DI31 31 32 DO31 Terminal Board with One 37-pin D-sub Connector DAQ-MTLB for MATLAB +5Vout 33 34 GND and DIN-Rail Mounting (Cables are not included.) PCIS-DASK for Windows O-ACK 35 36 O-TRG ACLD-9137-01 PCIS-DASK/X for Linux O-REQ 37 38 N/C General-Purpose Terminal Board with One 37-pin N/C 39 40 N/C D-sub Male Connector Specifications ACLD-9137F-01 CN2 General-Purpose Terminal Board with One 37-pin DI0 1 20 DO0 Digital I/O D-sub Female Connector DI1 2 21 DO1 Number of channels: ACL-10137-1MM DI2 3 22 DO2 32-CH digital inputs 37-pin D-sub male/male cable, 1 M DI3 4 23 DO3 32-CH digital outputs DI4 5 24 DO4 ACL-10137-1MF Compatibility: 5 V/TTL DI5 6 25 DO5 37-pin D-sub male/female cable, 1 M Data transfer rate DI6 7 26 DO6 12 MB/s with external 3 MHz clock, handshaking * For more information on mating cables, please refer to P2-61/62. DI7 8 27 DO8 or external strobe DI8 9 28 DO7 8 MB/s with internal 2 MHz timer pacer DI9 10 29 DO9 Ordering Information Digital logic levels DI10 11 30 DO10 Input high voltage: 2-5.25 V PCI-7200 DI11 12 31 DO11 Input low voltage: 0-0.8 V 12 MB/s High-Speed 32-CH DI & 32-CH DO Card DI12 13 32 DO12 Output high voltage: 2.7 V minimum DI13 14 33 DO13 PCIe-7200 Output low voltage: 0.5 V maximum DI14 15 34 DO14 12 MB/s High-Speed 32-CH DI & 32-CH DO Output driving capacity DI15 16 35 DO15 PCI Express card Source current: 3.0 mA +5Vout 17 36 GND Sink current: 24 mA I-ACK 18 37 I-TRG Data transfers: I-REQ 19 programmed I/O, interrupt, bus-mastering DMA Programmable Counter Base clock: 4 MHz Timer 0: DI clock source Timer 1: DO clock source Timer 2: Base clock source of timer 0 & 1 Interrupt Sources: EO ACK, EI REQ, Timer 0, Timer 1 or Timer 2 2-43 www.adlinktech.com Updated 03-28, 2012. 2012 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.