ACL-10250-1 ADLINK Technology

Building Forward Together PCI-7250/7251, LPCI-7250, LPCIe-7250, cPCI-7252 8-CH Relay Outputs & 8-CH Isolated DI Cards Features Supports a 32-bit 5 V PCI bus (PCI-7250/7251) Supports a 32-bit 3.3 V or 5 V PCI bus (LPCI-7250) x1 lane PCI Express Interface (LPCIe-7250) 3U Eurocard form factor, CompactPCI compliant PCI-7250 PCI-7250+PCI-7251 (PICMG 2.0 R2.1) (cPCI-7252) 4-CH SPDT & 4-CH SPST relays (PCI-7250) 8-CH SPDT & 8-CH SPST relays (PCI-7250 + 1 x PCI-7251) 12-CH SPDT & 12-CH SPST relays (PCI-7250 + 2 x PCI-7251) 16-CH SPDT & 16-CH SPST relays (PCI-7250 + 3 x PCI-7251) 8-CH SPDT (LPCI-7250/LPCIe-7250/cPCI-7252) Non-latching relays cPCI-7252 Onboard LED indicators for relay status Onboard relay driving circuits Relay output status read back 8-CH isolated digital inputs (cPCI-7252/PCI-7250/LPCI-7250/ LPCIe-7250) 16-CH isolated digital inputs (PCI-7250 + 1 x PCI-7251) 24-CH isolated digital inputs (PCI-7250 + 2 x PCI-7251) 32-CH isolated digital inputs (PCI-7250 + 3 x PCI-7251) LPCI-7250 LPCIe-7250 Onboard low-pass filtering for digital inputs Compact, low-profile size PCB (LPCI-7250/LPCIe-7250) Terminal Boards & Cables Introduction PCI-7250/7251: ADLINK s PCI-7250/7251 provide 4-CH SPDT (Form C) & 4-CH DIN-37D-01 SPST (Form A) relay outputs and 8-CH isolated digital inputs. The Terminal Board with One 37-pin D-sub Connector LPCI/LPCIe-7250 and cPCI-7252 provide 8-CH SPDT (Form C) relay and DIN-Rail Mounting (Cables are not included.) outputs and 8/16-CH isolated digital inputs. The status of each relay ACLD-9137-01 output is represented by an onboard LED. When the relay is in SET General-Purpose Terminal Board with One 37-pin condition, its corresponding LED will turn ON, and on the contrary, D-sub Male Connector it is OFF. All digital input channels are nonpolarity, optically isolated, and may be set to use RC filter or not. The devices are suitable for ACL-10137-1MM collecting digital inputs in noisy environments. 37-pin D-sub male/male cable, 1 M The PCI-7251 is an 8-CH relay outputs and 8-CH isolated DI LPCI-7250/LPCIe-7250/cPCI-7252: extension card of the PCI-7250. All the I/O functions of PCI-7251 DIN-50S-01 are the same as those of the PCI-7250. The PCI-7251 has to be Terminal Board with One 50-pin SCSI-II Connector connected with PCI-7250 and the bus interface is controlled by and DIN-Rail Mounting (Cables are not included.) the PCI-7250. Up to three PCI-7251 cards can be connected to one ACL-10250-1 PCI-7250, therefore, expanding the PCI-7250 s DIO from 8 DIO to 50-pin SCSI-II cable (mating with AMP-787082-5), 1 M maximum 32 DIO. Operating Systems Ordering Information PCI-7250 Windows 7/Vista/XP/2000/2003 Server Linux 8-CH Relay Outputs & 8-CH Isolated DI Card PCI-7251 Recommended Software 8-CH Relay Outputs & 8-CH Isolated DI Extension Card for PCI-7250 AD-Logger LPCI-7250 VB.NET/VC.NET/VB/VC++/BCB/Delphi 8-CH Relay Outputs & 8-CH Isolated DI Low-Profile DAQBench PCI Card LPCIe-7250 Driver Support 8-CH Relay Outputs & 8-CH Isolated DI Low-Profile DAQPilot for LabVIEW PCI Express Card DAQ-MTLB for MATLAB cPCI-7252 PCIS-DASK for Windows 8-CH Relay Output & 16-CH Isolated DI Module PCIS-DASK/X for LinuxIsolated Digital Input Specifications Number of channels: 8 Relay Output Maximum input range: 24 V, non-polarity Number of channels: 8 Digital logic levels Relay types 0-24 V, non-polarity PCI-7250/7251: - Input high voltage: - Channel 0-3: SPDT (normal open) 5-24 V (PCI/LPCI/LPCIe-7250, PCI-7251) - Channel 4-7: SPST (normal open) 3-24 V (cPCI-7252) LPCI-7250/LPCIe-7250/cPCI-7252 - Input low voltage: - Channel 0-7: SPDT (normal open) 0-1.5 V (PCI/LPCI/LPCIe-7250, PCI-7251) Contact rating 0-1 V (cPCI-7252) PCI-7250/7251 & cPCI-7252 Input resistance: 2.2 k 0.33 W (PCI/LPCI/LPCIe-7250, PCI-7251) - AC: 120 V 0.5 A 1.2 k 0.5 W (cPCI-7252) - DC: 24 V 1 A Isolation voltage: 5000 VRMS LPCI-7250/LPCIe-7250 Data transfers: programmed I/O - DC: 30 V 2 A General Specifications Breakdown voltage: 1000 VRMS I/O connector Contact resistance: 100 m PCI-7250/7251 Relay ON/OFF time - 37-pin D-sub female Operate time: 8 ms LPCI-7250/LPCIe-7250/cPCI-7252 Release time: 8 ms - 50-pin SCSI-II female LED indicators: onboard LEDs for relay status Operating temperature: 0 C to 60 C Expected life Storage temperature: -20 C to 80 C PCI-7250/7251 & cPCI-7252 Relative humidity: 5% to 95%, non-condensing - >5x105 operations 1 A, 24 VDC Power requirements - >2x105 operations 0.5 A, 120 VAC LPCI-7250/LPCIe-7250: Device Power Consumption PCI-7250 +5 V 140 mA typical - >105 operations 2 A, 30 VDC PCI-7251 +5 V 125 mA typical - >5x105 operations 1 A, 30 VDC LPCI-7250 +5 V 200 mA typical Data transfers: programmed I/O +3.3 V 280 mA LPCIe-7250 +12 V 180 mA Dimensions (not including connectors) 162 mm x 107 mm (PCI-7250) 141 mm x 102 mm (PCI-7251) 120 mm x 65 mm (LPCI-7250) 120 mm x 69 mm (LPCIe-7250) 160 mm x 100 mm (cPCI-7252) www.adlinktech.com All products and company name listed are trademarks or trade names of their respective companies. Updated Dec. 26, 2016. 2016 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.