PCES-8581-4S/13S PCIe-to-PCI Expansion Systems Introduction Harnessing the bandwidth potential of PCI Express, these smart expansion systems enable computers with a PCI Express slot to remotely manage and control up to 13 PCI devices seven meters away. Offering up to 13 (PCES- 8581-13S) or four PCI slots (PCES-8581-4S), these expansion systems operate in 32-bit/33 MHz configuration and come with complete end-to-end hardware and software transparency for the host system. Hardware devices installed in the expansion system function as if directly installed into the host system, requiring no additional PCES-8581-4S drivers or software installation.The host system may be separated from the expansion system at up to seven meters using high-quality shielded twisted copper cables. The robust and reliable PCI expansion- to-PCI expansion systems are suited for portable test and measurement applications with high-density I/O requirement and in hazardous industrial control and automation environments. Controlling PCI Remotely via the PCI Express Interface Most commercial desktop PCs are equipped with only one or two PCI slots. For systems requiring control of multiple PCI devices from one PC system, this limitation causes great difficulty when searching for and deciding on a suitable computer system. With the ADLINK PCES-8581-13S expansion system, users can easily expand their system and conveniently accommodate 13 PCI devices or more. PCES-8581-13S For rugged applications where the PC system is subjected to a hazardous environment, valuable components such as the CPU and hard disk drive are easily damaged. To protect these valuable IT investments, the PCES-8581-13S and the PCES-8581-4S PCI Express-to-PCI expansion system can be controlled remotely at Features up to 7 meters from the host PC using a high-speed and well-shielded cable. While the host PC system is installed at PCI Express-based control of PCI - PCES-8581-4S/13S a safe distance from the rugged environment, the remote expansion system is designed to withstand extreme High-speed PCI Express x1 interface temperatures or high vibration. If the PCI devices require less electromagnetic interference, you may also use the Compatible with 5 V and 3.3 V PCI signaling PCI Express-to-PCI expansion system to isolate high frequency interferences from the CPU, memory, or 32-bit/33 MHz PCI interface support North/Southbridge chips. These expansion systems also allow close installation of your DAQ and/or control PCES-8581-4S expand four half-size PCI slots cards with the DUT (Device Under Test) for a more compact and space-saving test and measurement in a shoebox size wallmount chassis with built-in 200 W environment. power supply PCES-8581-13S expands 13 full-size PCI slots in a 19 rack- mount chassis with built-in 400 W power supply Extension distance of up to 7 meters (extension cables at 1 M, 3 M, and 7 M) High/Low Temperature Comprehensive hardware and software transparency Environment Compliant with PCI Express Base Specification Rev. 1.0a PCI-to-PCI Bridge Architecture Specification, Revision 1.2 PCI Local Bus Specification, Revision 3.0 Shock/Vibration Environment Connect your laptop to up to four PCI cards Expand PCI connectivity from a laptop Separate your PC system and PCI devices, protect computer your PC system from hazardous environments. 4-5 www.adlinktech.com Updated September 23, 2014. 2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.Expansion Systems RK-8005 PCIe-8560 RK-8014 Specifications General Specifications Operating temperature: 0C to 50C (32F to 122F) PCIe-8560 PCI Express Base Specifications Rev. 1.0a compliant Storage temperature: -20C to 80C (-4F to 176F) PCI Express x1 link with 250 MB/s data throughput Relative humidity: 10% to 90%, non-condensing Dimension: Low-profile PCI Express card (69 mm (H) x 87 mm (W), 2.69 x 3.39) Power requirements: Device +3.3 V Ordering Information PCIe-8560 210 mA PCES-8581-4S PCI-8565 PCI-to-PCI Bridge Architecture Specifications Rev. 1.2 compliant Includes One PCIe-8560, One RK-8005, and One PCI Local Bus Specifications Rev. 3.0 compliant ACL-EXPRESS-3 Cable Supports 5 V and 3.3 V PCI bus PCES-8581-13S Dimensions: Low-profile PCI add-on card (64 mm (H) x 120 mm (W), 2.49 x 4.68) Includes One PCIe-8560, One RK-8014, and One Power requirements: ACL-EXPRESS-3 Cable Device +3.3 V ACL-EXPRESS-1 PCI-8565 720 mA Optional 1 M Expansion Cable RK-8005 Dimensions: ACL-EXPRESS-3 - 122 mm (W) x 195 mm (H) x 259 mm (D) (4.75 x 7.6 x Optional 3 M Expansion Cable 10.1), for half-sized PCI cards ACL-EXPRESS-7 Weight: 3.2Kg (7.04 lb) Optional 7 M Expansion Cable Backplane: Five 32-bit/33 MHz half-sized PCI slots - 1 slot for expansion card - 4 slots available for PCI cards Power supply: - Input voltage: 85 VAC to 265 VAC - Output: 200 W Cooling: One 37.5 CFM ball bearing fan (80 mm) RK-8014 Dimensions: 483.5 mm (W) x 177 mm (H) x 448.5 mm (D) (18.85 x 6.9 x 17.5) Weight: 12 Kg (26.4 lb) PCI-8565 Backplane: 14 x 32-bit/33 MHz full-sized PCI slots - 1 slot for expansion card - 13 slots available for PCI cards Power supply: - Input voltage: 85 VAC to 265 VAC with auto-switching - Output: 400 W Cooling: Two 88 CFM ball bearing fan (120 mm) ACL-EXPRESS-1/-3/-7 Length: 1 M, 3 M, 7 M ACL-EXPRESS-1/-3/-7 PCIe-to-PCI Expansion Systems Expansion System Includes Slots Expansion System Model Host Bus Type Cable Option Card Expansion Bus Type No. Card (Host) Accessory (Remote) Chassis PCES-8581-4S PCI Express PCI 4 PCIe-8560 PCI-8565 RK-8005 ACL-EXPRESS-3 ACL-EXPRESS-1/-7 PCES-8581-13S PCI Express PCI 13 PCIe-8560 PCI-8565 RK-8014 ACL-EXPRESS-3 ACL-EXPRESS-1/-7 4-6 Updated September 23, 2014. 2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. www.adlinktech.com