ACL-PXIES-2 ADLINK Technology

Building Forward Together PCI-8570/PXI-8570 PCI Control of PXI/CompactPCI Features Direct PC control of PXI/CompactPCI systems Multi-chassis configurations for PXI/CompactPCI Up to 2 PCI segments extended from single PCI/PXI-8570 Up to 64-bit, 66 MHz PCI bus expansion StarFabric link performance 528 MB/s peak (64-bit, 66 MHz PCI) 132 MB/s peak (32-bit, 33 MHz PCI) PCI-8570 Expansion distance of up to 5 meters Completely hardware and software transparent Independence of operating systems Seamless PCI interrupt extension Compliant with PCI local Bus Specifications Rev. 2.2 PCI-to-PCI Bridge Architecture Specifications Rev. 1.1 PXI-8570 PXI Specifications Rev. 2.2 Introduction Ordering Information The ADLINK PCI/PXI-8570 expansion kit is a PCI-to-PXI or PXI-to-PXI PCI-8570 expansion module that functions as a transparent PCI-to-PCI bridge PCI-to-PXI Expansion Interface Card for Host PC register set. Implementing master and slave extension modules, PXI-8570 users can have direct control of PXI/CompactPCI chassis from any PCI-to-PXI/PXI-to-PXI Expansion Interface Module for PXI Chassis other PC or another PXI/CompactPCI system. All devices on the ACL-PXIES-5 system are deemed to be local devices on the same PCI bus. Copper Cable Kit, 5 M The PCI interface supports 64-bit or 32-bit PCI buses operating at 66 MHz or 33 MHz. By adopting shielded twisted copper cables, PCI-8570/PXI-8570 can expand the transmission distance to 5 meters. One master expansion card (either PCI-8570 or PXI-8570) can expand up to 2 slave expansion modules (PXI-8570) at the same time. A bundled link can support the full bandwidth of a 64- bit/66 MHz PCI bus. All interrupts asserted by add-in cards in the expansion system are passed through the expansion set to the host system. With ADLINK PCI/PXI-8570, users can combine PCI, CompactPCI, and PXI devices in the same system, increase the available number of PXI/CompactPCI slots for high-density I/O application and separate a control system from a harsh environment with an expansion chassis. PSpecifications Model Name PCI-8570 PXI-8570 PXI Specifications Rev. 2.2 compliant PCI-to-PCI Bridge Architecture Specifications Rev. 1.1 Compliance PCI local bus specifications Rev. 2.2 compliant compliant PCI Local Bus Specifications Rev. 2.2 compliant Operating Temp. 0C to +50C (32F to 122F) Storage Temp. -20C to +80C (-4F to 176F) Relative Humidity 10% to 90%, non-condensing 132 MB/s (32-bit, 33 MHz PCI) Maximum data throughput 528 MB/s (64-bit, 66 MHz PCI) PCI interface 32-bit/66 MHz and 64-bit/66 MHz I/O Connector RJ-45 connector x 4 Extended distance up to 10 meters Internal arbiter supports up to 7 external masters 160 mm (H) x 100 mm (W)(6.24 x 3.9) 3U PXI form factor 175 mm (W) x 107 mm (H) Dimensions (not including connectors) (6.82 x 4.17) +5 V 190 mA Power requirement +3.3 V 250 mA 540 mA ACL-PXIES-5 Length: 5 M Emissions Compliance FCC Class A ,CE Compliance www.adlinktech.com All products and company name listed are trademarks or trade names of their respective companies. Updated Nov. 10, 2016. 2016 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.