ETX-BT-J1900 ADLINK Technology

ETX-BT ETX Module with Intel Atom Processor E3800 Series SoC Features Single, dual or quad-core Intel Atom SoC or Celeron Processor Single SODIMM for up to 8GB Single SODIMM DDR3L at 1333 MHz Dual channel 24-bit LVDS, analog VGA 2 SATA or 2 PATA (Master only), 4x USB 2.0, 10/100 Mbps LAN (GbE via onboard connector) Extreme Rugged operating temperature: -40C to +85C (build option) Supports Smart Embedded Management Agent (SEMA) functions Specifications Core System Audio CPU Chipset Single, dual or quad-core Intel Atom or Celeron Processor Intel HD Audio integrated in SOC Intel Atom E3845 1.91 GHz 542/792 (Turbo) 10W (4C/1333) Audio Codec Intel Atom E3827 1.75 GHz 542/792 (Turbo) 8W (2C/1333) Intel Atom E3826 1.46 GHz 533/667 (Turbo) 7W (2C/1066) Realtek ALC 262, 4-channel High Definition Audio Intel Atom E3825 1.33 GHz 533 (No Turbo) 6W (2C/1066) Intel Atom E3815 1.46 GHz 400 (No Turbo) 5W (1C/1066) Ethernet Intel Atom E3805 1.33 GHz 533 (No Turbo, No Graphics) 4W (2C/1066) Type: Intel i211 (MAC/PHY) Ethernet controller Celeron N2930 1.83 GHz, 400/756 (Turbo) 7.5W (4C/1066) Celeron N2807 1.58 GHz 313/750 (Turbo) 4.5W (2C/1333) Interface: 10/100 Mbps LAN (GbE via onboard connector) Celeron J1900 2.00 GHz, 688/792 (Turbo) 10W (4C/1333) Supports: Single, dual or quad Out-of-Order Execution (OOE) processor Video cores, Intel VT-x, Intel SSE4.1 and SSE4.2, Intel 64 architecture, IA 32-bit , GPU Feature Support PCLMULQDQ Instruction DRNG, Intel Thermal Monitor (TM1 & TM2) 7th generation graphics Intel core architecture with four Execution Units, Note: Availability of features may vary between processor SKUs. supporting two independent displays Memory 3D graphics hardware acceleration Single SODIMM socket for up to 8GB non-ECC Support for DirectX 11, OCL 1.1, OGL ES Halt/2.0/1.1, OGL 3.2 1333/1066 MHz DDR3L memory Video decode hardware acceleration including support for H.264, MPEG2, MVC, VC-1, WMV9 and VP8 Embedded BIOS Video encode hardware acceleration including support for H.264, MPEG2 and AMI EFI with CMOS backup in 8MB SPI BIOS MVC formats Cache VGA Primary 32 kB, 8-way L1 instruction cache and 24 kB, 6-way L1 write-back Analog VGA supporting resolutions of up to 2560 x 1600 60Hz, 24bpp data cache LVDS Expansion Busses Single/dual channel 18/24-bit LVDS from eDP (two lane) PCI 32-bit rev 2.3 at 33MHz supporting 4 bus masters ISA 16-bit (through 2 LPC-ISA bridge), no DMA support SMBus (system) , I C (user) SEMA Board Controller Supports: Voltage/Current monitoring, Power sequence debug support, AT/ ATX mode control, Logistics and Forensic information, Flat Panel Control, General Purpose I2C, Watchdog Timer Debug Headers 40-pin multipurpose flat cable connector Use in combination with DB-40 debug module providing BIOS POST code LEDs, BMC access, SPI BIOS flashing, power testpoints, debug LEDs Note: Build option indicates an alternative BOM configuration to support additional or alternative functions that are not available on the standard product. Be aware that part numbers for SKUs with build options will need to be created and may cause production lead times.Specifications Multi I/O and Storage Mechanical and Environmental Form Factor: ETX Rev 3.02 USB: 4 ports USB 2.0 PATA: up to two PATA IDE supporting Master only through SATA-to-PATA Dimension: 114 mm x 95 mm controller Operating Temperature SATA: 2 SATA 3Gb/s ports, shared with PATA Standard Operating Temperature: 0C to +60C (Default is port 1: PATA, port 2: SATA. Other PATA/SATA configurations are build options.) Screened Extreme Rugged Operating Temperature: -40C to +85C (build option) SSD: optional SATA SSD 4 - 64GB (occupies second SATA port) Humidity Super I/O 5-90% RH operating, non-condensing Chipset: Nuvoton W83627DHG-PT 5-95% RH storage (operating with conformal coating) Serial: Two high speed RS-232C ports (COM1/COM2) Shock and Vibration IrDA: Supports IrDA 1.0 SIR protocol or Sharp ASK-IR protocol IEC 60068-2-64 and IEC-60068-2-27 Parallel: SPP, ECP and EPP mode support (LPT1) MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Keyboard Mouse: PS/2 type keyboard and mouse Table 214-I, Condition D Power HALT Standard Input: ATX = 5V5% / 5Vsb 5% or AT = 5V5% Thermal Stress, Vibration Stress, Thermal Shock and Combined Test Management: ACPI 4.0 compliant, Smart Battery support Power States: C0, C1, C1E, C4, C6 S0, S3, S4, S5 (Wake on USB S3/S4, WOL S3/S4/S5) ECO mode: Supports deep S5 (ECO mode) for power saving Operating Systems Standard Support Windows 7/8 32/64-bit, Linux 32/64-bit Extended Support (BSP) WES7/8, WEC7/8, Linux, VxWorks Note: Build option indicates an alternative BOM configuration to support additional or alternative functions that are not available on the standard product. Be aware that part numbers for SKUs with build options will need to be created and may cause production lead times.