PCI-7248 ADLINK Technology

Digital I/O PCI-7296/7248/7224, PCIe-7296/7248 96/48/24-CH Opto-22 Compatible DIO Cards Introduction ADLINK s PCI-7296/7248/7224 and PCIe-7248/7296 are high-density parallel digital I/O boards with 96/48/24 I/O channels. The header connectors are fully compatible with industry Opto-22 standard. Thus, PCI-7296/7248/7224 and PCIe-7248/7296 can utilize the Opto-22 external devices. The PCI-7296/7248/7224 and PCIe-7248/7296 devices PCI-7224 emulate mode 0 of the industry standard 8255 programmable peripheral interface (PPI) chips. The PCI-7296/7248/7224 and PCIe-7248/7296 provides 4/2/1 PPI chips respectively. Each PPI offers three 8-bit ports: Port A, Port B and Port C. The Port C is divided into 2 nibble-wide (4-bit) ports. The PCI-7296/7248/7224 and PCIe-7248/7296 devices have programmable timer/counters. One 16-bit counter is available for event counting, while the other 32-bit timer is available for timed interrupt generation. PCI-7296 The PCI-7296/7248/7224 and PCIe-7248/7296 devices provide multiple programmable interrupt sources from DIO channels, as well as the output of the timer. Specifications Ordering Information PCI-7248 Digital I/O PCI-7296 96-CH Opto-22 Compatible DIO Card Number of channels 96 inputs/outputs (PCI/PCIe-7296) PCI-7248 48 inputs/outputs (PCI/PCIe-7248) 48-CH Opto-22 Compatible DIO Card 24 inputs/outputs (PCI-7224) Compatibility: 5 V/TTL PCI-7224 PCIe-7296 Digital logic levels 24-CH Opto-22 Compatible DIO Card Input high voltage: 2-5.25 V Input low voltage: 0-0.8 V PCIe-7248 Output high voltage: 2.4 V minimum 48-CH Opto-22 Compliant PCIe DIO Card Output low voltage: 0.5 V maximum PCIe-7296 Output driving capacity PCIe-7248 96-CH Opto-22 Compliant PCIe DIO Card Source current: 2.6 mA for port A & B, and 15 mA for port C. Note: Sink current: 24 mA The PCI-7224 is the 24-CH version of the PCI-7248. The software Data transfers: programmed I/O drivers of the PCI-7224 are exactly the same as those of the PCI-7248 Features General Specifications Supports a 32-bit 5 V PCI bus (PCI-7224/7248/7296) I/O connector x1 PCI Express interface (PCIe-7248/7296) 50-pin ribbon male x 1 (PCI-7224) Pin Assignment 96-CH digital TTL/DTL inputs/outputs (PCI/PCIe-7296) 50-pin ribbon male x 2 (PCI/PCIe-7248) 48-CH digital TTL/DTL inputs/outputs (PCI/PCIe-7248) 50-pin ribbon male x 4 (PCI/PCIe-7296) PCI-7224/7248/7296 & PCIe-7248/7296 24-CH digital TTL/DTL inputs/outputs (PCI-7224) Operating temperature: 0C to 60C Storage temperature: -20C to 80C Emulates 4/2/1 industry standard 8255 PPI (mode 0) PnC7 1 2 +12Vout/GND (User Selection) Relative humidity: 5% to 95%, non-condensing PnC6 +12Vout/GND (User Selection) 3 4 Direct interface with OPTO-22 compatible I/O modules Power requirements PnC5 5 6 GND Output status read back PnC4 GND 7 8 Device Power Consumption Onboard 8254 timer/counter chip PnC3 9 10 GND PCI-7296 860 mA 5 VDC Typical PnC2 GND 11 12 One 32-bit timer for timed interrupt generation PCI-7248 500 mA 5 VDC Typical PnC1 13 14 GND PCI-7224 330 mA 5 VDC Typical One 16-bit event counter to generate event interrupt PnC0 GND 15 16 350 mA 12 VDC Typical Programmable interrupt sources PCIe-7248 PnB7 17 18 GND 280 mA 3.3 VDC Typical PnB6 GND +12 V and +5 V power available on OPTO-22 connectors 19 20 590 mA 12 VDC Typical PCIe-7296 PnB5 21 22 GND Onboard resettable fuses for power output protection 280 mA 3.3 VDC Typical PnB4 GND 23 24 Compact, half-size PCB Dimensions (not including connectors) PnB3 25 26 GND 148 mm x 102 mm (PCI-7248 and PCI-7224) Operating Systems PnB2 GND 27 28 166 mm x 102 mm (PCI-7296) PnB1 29 30 GND Windows Vista/XP/2000/2003 168 mm x 112 mm (PCIe-7248/7296) PnB0 GND 31 32 Linux PnA7 33 34 GND Recommended Software PnA6 GND 35 36 Terminal Boards PnA5 37 38 GND AD-Logger TB-24R-01* PnA4 GND 39 40 VB.NET/VC.NET/VB/VC++/BCB/Delphi Terminal Board with 24-CH Relay Outputs PnA3 41 42 GND DAQBench TB-24P-01* PnA2 GND 43 44 Terminal Board with 24-CH Isolated Digital Inputs Driver Support PnA1 45 46 GND TB-16P8R-01* PnA0 GND 47 48 DAQPilot for LabVIEW Terminal Board with 16-CH Isolated DI & 8-CH +5Vout 49 50 GND DAQ-MTLB for MATLAB Relay Outputs PCIS-DASK for Windows DIN-24R-01* PCIS-DASK/X for Linux * Cables are not included. For more information about mating Terminal Board with 24-CH Relay Outputs cables, please refer to P2-61/62. DIN-24P-01* Terminal Board with 24-CH Isolated Digital Inputs and DIN-Rail Mounting 2-55 www.adlinktech.com Updated 03-28, 2012. 2012 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Data Logging & Acquisition category: Click to view products by ADLINK Technology manufacturer: Other Similar products are found below : PCI-6208A DAQe-2502 PXI-2208 ACL-8112DG SpotBotBLE LPCI-7230 USB-4761-BE SE028 PCI-1761-BE AR207/8/S1/PPPP/IP65 PCI-1711UL-CE USB-4702-AE USB-4704-AE USB-4716-AE USB-4750-BE USB-4751-AE PCIE-1810-AE PCI-1710U-DE PCI- 1710HGU-DE AR207/8/S1/PPPP/IP30 U2781A 4610 EL-USB-5 AR407/S1/P/P/P/P AR207/8/S2/PPPP/IP30 ACL-8112PG cPCI-7248 cPCI-7433 DAQ-2213 ND-6053 ND-6060 PCI-7230 PCI-7432 PCI-7442 PCI-9112 PCI-9112A PCI-9113A PCI-9221 PCM-7248+ USB- 1903 USB-2401 PCIE-1813-AE PCIE-1816-AE PCIE-1816H-AE PCIE-1884-AE USB-5856-AE USB-5860-AE USB-5862-AE AR654/S1/P/P/P/P/IP30 AR654/S2/P/P/P/P/IP30