General-Purpose DAQ PCI-9112 16-CH 12-Bit 110 kS/s Multi-Function DAQ Card Terminal Boards & Cables Specifications For PCI-9112: Analog Input DIN-37D-01 Number of channels: 16 single-ended or 8 differential Terminal Board with One 37-pin D-sub Resolution: 12 Bit Connector and DIN-Rail Mounting Conversion time: 8 s Maximum sampling rate: 110 kS/s DIN-20P-01 Input signal ranges Terminal Board with One 20-pin Ribbon Connector and DIN-Rail Mounting Gain Input Range Bipolar Unipolar ACLD-9137-01 PCI-9112 10 V - 0.5 General-Purpose Terminal Board with One 5 V 0 to 10 V 1 37-pin D-sub Male Connector 2.5 V 0 to 5 V 2 ACLD-9138-01 1.25 V 0 to 2.5 V 4 General-Purpose Terminal Board with One 0.625 V 0 to 1.25 V 8 37-pin D-sub Connector Features Accuracy Supports a 3.3 V or 5 V PCI bus (PCI-9112) ACLD-9182A-01 Gain Accuracy 12-Bit A/D resolution Terminal Board with 16-CH Isolated Digital Inputs 0.5, 1 0.01% of FSR 1 LSB Up to 110 kS/s sampling rate ACLD-9185-01 2, 4 0.02% of FSR 1 LSB 16-CH single-ended or 8-CH differential inputs Terminal Board with 16-CH Isolated Digital Inputs 8 0.04% of FSR 1 LSB Bipolar or unipolar analog input ranges ACL-10137-1MM Input coupling: DC Programmable gains of x0.5, x1, x2, x4, x8 37-pin D-sub male/male cable, 1 M Overvoltage protection: continuous 35 V Automatic analog inputs scanning ACL-10137-1MF Input impedance: 1 G Bus-mastering DMA for analog inputs 37-pin D-sub male/female cable, 1 M Trigger modes: software 2-CH 12-Bit multiplying analog outputs Data transfers: ACL-10120-1 16-CH TTL digital inputs and 16-CH TTL digital outputs programmed I/O, interrupt, bus-mastering DMA 20-pin flat cable, 1 M 1-CH 16-Bit general-purpose timer/counter ACL-10237-1 Analog Output Supported Operating System 37-pin D-sub male/male flat cable, 1 M Number of channels: 2 voltage outputs * For more information on mating cables, please refer to Windows 7/8 x64/x86, Linux Resolution: 12 Bit P3-48/49. Output ranges (software programmable) Driver and SDK Output Range LabVIEW, MATLAB, C/C++, Visual Basic, Unipolar 0 to 10 V, 0 to 5 V, 0 to EXTREF Visual Studio.NET Ordering Information Output driving capacity: 5 mA max Settling time: 30 s to 0.5 LSB Software Utility PCI-9112 16-CH 12-Bit 110 kS/s Multi-Function DAQ Card Data transfers: programmed I/O AD-Logger (AO Calibrated on 5V) Digital I/O PCI-9112A Number of channels: 16 inputs and 16 outputs 16-CH 12-Bit 110kS/s Multi Function DAQ Card Compatibility: 5 V/TTL (AO Calibrated on 10V) Data transfers: programmed I/O General-Purpose Timer/Counter Number of channels: 1 Resolution: 16 Bit Compatibility: 5 V/TTL Base clock available: 2 MHz, external clock to 10 MHz Calibration PCI-9112 : Calibrate Analog Output on 5V PCI-9112A : Calibrate Analog Output on 10V General Specifications I/O connector: 37-pin D-sub female Operating temperature: 0C to 60C (32F to 140F) Storage temperature: -20C to 80C (-4F to 176F) Relative humidity: 5% to 95%, non-condensing Power requirements +5 V +12 V PCI-9112A 460 mA typical 110 mA typical Dimensions (not including connectors) 175 mm x 107 mm (6.82 x 4.17 ) 3-28 Updated September 23, 2014. 2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. www.adlinktech.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Data Logging & Acquisition category: Click to view products by ADLINK Technology manufacturer: Other Similar products are found below : PCI-6208A DAQe-2502 PXI-2208 ACL-8112DG SpotBotBLE MCM-204 USB-4711A-BE ACL-7130 LPCI-7230 PXES-2780 Rack-Mount kit USB-4761-BE SE028 PCI-1761-BE PCI-1711UL-CE USB-4702-AE USB-4704-AE USB-4716-AE USB-4750-BE USB-4751-AE USB-4751L-AE PCI-1710UL-DE PCI-1710U-DE PCI-1710HGU-DE AR207/8/S1/PPPP/IP30 U2781A 4610 AR407/S1/P/P/P/P AR207/8/S2/PPPP/IP30 ACL-8112PG cPCI-7248 cPCI-7433 DAQ-2213 DAQe-2205 ND-6053 ND-6060 PCI-7230 PCI-7432 PCI-7442 PCI-9112 PCI-9112A PCI-9113A PCI-9221 PCM-7248+ USB-1903 USB-2401 PCIE-1813-AE USB-5860-AE USB-5862-AE AR654/S1/P/P/P/P/IP30 AR654/S2/P/P/P/P/IP30