PCIe/PXIe-9852 2-CH 14-Bit 200 MS/s High-Speed PCI Express/PXI Express Digitizers Introduction The ADLINK PCIe/PXIe-9852 is a 2-CH 14-bit 200 MS/s digitizer for high frequency and wide dynamic range signals with an input frequency up to 90 MHz. The 90 MHz bandwidth analog input with 50 impedance is designed to receive 0.2 V, 2 V, or 10 V high speed signals. With a PCI Express bus interface and ample onboard acquisition memory up to 1 GB, the PCIe/PXIe-9852 easily manages simultaneous 2-CH data streaming. PCIe-9852 With high speed and high linearity 14-bit A/D converters and high stable onboard reference, the PCIe/PXIe-9852 provides both high accuracy and high dynamic performance, making it ideal for applications requiring high-speed data acquisition, such as optical fiber and LIDAR testing, and video signal analysis. PXIe-9852 Highlights Data Streaming Up to 800MB/s Based on PCI Express Gen2 technology, the PCIe/PXIe-9852 can stream data on both channels at its maximum Features data rate (200 MS/s), and continuously stream data to the host PC at rates up to 800 MB/s. An 8 x 500 GB driver PCI Express specification Rev. 2.0 compliant (PCIe-9852) RAID system (4TB) extends capture sessions to more than one hour. PXI Express specification Rev. 1.0 compliant (PXIe-9852) Up to 200 MS/s sampling rate Onboard Signal Averaging Technology 2 simultaneous analog inputs Every PCIe/PXIe-9852 provides onboard Signal Averaging, allowing detection of small repetitive signals in noisy High resolution 14-bit ADC environments with no CPU loading, suitable for applications requiring extraction of small signals from background Up to 90 MHz bandwidth for analog input noise such as optical fiber testing. 1 GB onboard storage memory Programmable input voltage range of 0.2 V, 2 V, or 10 V Scatter-gather DMA data transfer for high speed data streaming Specifications One external digital trigger input and one external trigger output Analog Input One external clock input Number of Channels: 2 single-ended Full auto-calibration Input Coupling: AC or DC, software selectable Supports signal averaging AC coupling cutoff frequency: 11 Hz Supported Operating System -3 dB Bandwidth: 90MHz Windows 7/8 x64/x86, Linux Input Impedance: 50 or 1M, software selectable Driver and SDK Input Signal Range: Range: 0.2 V, 2 V, or 10 V Overvoltage Protection: LabVIEW, MATLAB, C/C++, Visual Basic, Visual Studio.NET with 50 : 10V sine wave, 7Vrms with 1M : 10V ADC Resolution: 14 bits, 1 in 16384 Gain Error: 0.65% of input Offset error: 1 mV Crosstalk: < -80 dB Spectral Characteristics Input Range:0.2 V Sampling Rate: 200 MS/s SINAD: 61.72 dBc SNR: 61.77 dBc THD: -81.42 dBc ENOB: 9.96 bit SFDR: 82.75 dBc Spectral Characteristics Input Range:2 V Sampling Rate: 200 MS/s SINAD: 62.06 dBc SNR: 62.11 dBc THD: -80.97 dBc ENOB: 10.02 bit SFDR: 85.87 dBc 2-9 www.adlinktech.com Updated September 23, 2014. 2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.Digitizers Trigger General Specifications Trigger Source I/O Connector Software SMA x 2 for analog inputs External digital SMA x 1 for external trigger input Analog inputs SMA x 1 for external trigger output SSI (PCIe-9852) SMA x 1 for external clock input PXI STAR (PXIe-9852) Dimensions (not including connectors): PXI trigger bus 0..7 (PXIe-9852) PCIe-9852 : 167.64 (W) x 106.68 (H) mm (6.53 x 4.16) PXIe DSTARB (PXIe-9852) PXIe-9852 : 160 (W) x 100 (H) mm (6.24 x 3.9) Trigger Modes Bus Interface: PCI Express Gen 2 x4 Post-trigger Ambient Temperature (Operating): Pre-trigger PCIe-9852 : 0C to 50C (32F to 122F) Middle trigger PXIe-9852 : 0C to 55C (32F to 131F) Delay trigger Ambient Temperature (Storage): -20C to 80C (-4F to 176F) External Digital Trigger Input Relative Humidity: 10% to 90%, non-condensing Source: Front panel SMA connector Power consumption: Compatibility: 3.3V TTL, 5V tolerance Power Rail Standby current (mA) Full load (mA) +3.3 V 102 102.2 Input high threshold: 2.0 V +12 V 20 20 Input low threshold: 0.8V +5 V 1920 2010 Maximum input overload: -0.5V ~ +5.5V Trigger polarity: Rising or falling edge, software programmable Certifications Pulse width: 20 ns minimum EMC/EMI: CE, FCC Class A External Digital Trigger Output Compatibility: 5V TTL Output high threshold: 2.4V IO connector definition Output low threshold: 0.2V Trigger polarity: Positive or negative Pulse width: 50 ns, 100 ns, 150 ns, 200 ns, 500 ns, 1 s, 2 s, 7.5 s, and 10 s Driving capacity: Capable of driving 50 load CLK IN Timebase TRG IN Timebase options Internal: onboard synthesizer TRG OUT External: CLK IN (front panel) CH0 Sampling clock frequency CH1 Internal: 200M Hz External: 40M Hz ~ 200M Hz (CLK IN) Timebase accuracy: <25 ppm External reference clock source: Front panel, SSI (PCIe-9852), PXI CLK10 or PXIe CLK100 (PXIe-9852) External reference clock: 10M Hz or 100M Hz External reference clock input range: 500mVpp ~ 5Vpp (AC/DC compliant) External sampling clock input range: 1Vpp ~ 5Vpp (AC/DC compliant) SSI Bus Cables (for multiple card synchronization) Data Storage and Transfer ACL-eSSI-2/3/4 1 GB onboard memory, shared among the two analog inputs SSI bus cable for two, three, and four devices Scatter-Gather DMA data transfer Onboard Reference +5V and +2.5V onboard reference voltage < 3.0 ppm/C reference temperature drift 15 minutes recommended warmup Ordering Information PCIe-9852 2-CH 14-Bit 200 MS/s High-Speed PCI Express Digitizer PXIe-9852 2-CH 14-Bit 200 MS/s High-Speed PXI Express Digitizer 2-10 Updated September 23, 2014. 2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. www.adlinktech.com