PXI/DAQ/DAQe-2200 Series 64-CH 12/16-Bit Up to 3 MS/s Multi-Function DAQ Cards Ordering Information / Quick Selection Guide Model Name Analog Input Analog Output DIO Timer/Counter No. of Sampling No. of Resolution Input range Resolution Update rate No. of channels No. of channels rate channels channels PXI/DAQ/DAQe-2204 32 DI/64 SE 12 Bit 3 MS/s 0.05 V to 10 V 2 12 Bit 1 MS/s 24-CH 8255 PIO 2-CH, 16-Bit PXI/DAQ/DAQe-2205 32 DI/64 SE 16 Bit 500 kS/s 1.25 V to 10 V 2 12 Bit 1 MS/s 24-CH 8255 PIO 2-CH, 16-Bit PXI-2204 PXI/DAQ/DAQe-2206 32 DI/64 SE 16 Bit 250 kS/s 1.25 V to 10 V 2 12 Bit 1 MS/s 24-CH 8255 PIO 2-CH, 16-Bit Specifications Model Name PXI/DAQ/DAQe-2204 PXI/DAQ/DAQe-2205 PXI/DAQ/DAQe-2206 Analog Input Resolution 12 Bit, no missing codes 16 Bit, no missing codes Number of channels 64 single-ended or 32 differential (software selectable per channel) Channel gain queue size 512 Maximum sampling rate 3 MS/s 500 kS/s 250 kS/s Programmable gain 1, 2, 4, 5, 8, 10, 20, 40, 50, 200 1, 2, 4, 8 DAQ-2204 Bipolar input ranges Max. : 10 V, Min. : 0.05 V10 V, 5 V, 2.5 V, 1.25 V10 V, 5 V, 2.5 V, 1.25 V Unipolar input ranges Max. : 0-10 V, Min. : 0-0.1 V0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V Offset error 2 mV 1 mV 2 mV Gain error 0.06% of FSR 0.08% of FSR 0.06% of FSR Input coupling DC Overvoltage protection Power on: Continuous 30 V, Power off: Continuous 15 V Input impedance 1 G/100 pF CMRR (gain = 1) 90 dB 83 dB Settling time 1 s to 0.1% error 2 s to 0.1% error 4 s to 0.01% error -3 dB small signal bandwidth 2 MHz 850kHz 600 kHz ( Bipolar +/-10V Gain=1) Trigger sources Software, external digital/analog trigger, SSI bus DAQe-2204 Trigger modes Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger FIFO buffer size 1 k samples Data transfers Polling, scatter-gather DMA Analog Output Number of channels 2 voltage outputs Resolution 12 Bit Features Output ranges 0-10 V, 10 V, 0-AOEXTREF, AOEXTREF Supports a 32-Bit 3.3 V or 5 V PCI bus (DAQ-2200 series) Maximum update rate 1 s x1 lane PCI Express Interface (DAQe-2200 series) Slew rate 20 V/s Settling time 3 s to 0.5 LSB accuracy PXI specification Rev 2.2 compliant (PXI-2200 series) Offset error 1 mV 2 mV 1 mV 64-CH single-ended or 32-CH differential analog inputs Gain error 0.02% of max. output 0.04% of max. output 0.02% of max. output Onboard 1 k-sample A/D FIFO Driving capacity 5 mA Bipolar or unipolar analog input ranges Stability Any passive load, up to 1500 pF Trigger sources Software, external digital/analog trigger, SSI bus Programmable gains: Trigger modes Post-trigger, delay-trigger, and repeated trigger x1, x2, x4, x5, x8, x10, x20, x40, x50, x200 (DAQ/DAQe-2204) FIFO buffer size 1 k samples Data transfers Programmed I/O, scatter-gather DMA x1, x2, x4, x8 (DAQ/DAQe-2205 & DAQ/DAQe-2206) Digital I/O 512-configuration channel gain queue Number of channels 24-CH 8255 programmable input/output Scatter-gather DMA for both analog inputs and outputs Compatibility 5 V/TTL Data transfers Programmed I/O 2-CH 12-Bit multiplying analog outputs with waveform General-Purpose Timer/Counter generation Number of channels 2 Onboard 1 k-sample D/A FIFO Resolution 16-Bit Base clock available 40 MHz, external clock up to 10 MHz 24-CH TTL digital input/output General Specifications 2-CH 16-Bit general-purpose timer/counter Auto Calibration Yes (+5 V, 2 ppm/C) Analog and digital triggering Dimensions 160 mm x 100 mm (6.24 x 3.9 ) (not including connectors) (PXI-2200 series) Fully auto calibration 175 mm x 107 mm (6.82 x 4.17 ) (not including connectors) (DAQ-2200 series) 168 mm x 107 mm (6.55 x 4.17 ) (not including connectors) (DAQe-2200 series) Multiple cards synchronization through SSI (System Connector 68-pin VHDCI female x 2 Synchronization Interface) bus or PXI trigger bus Operating temperature 0C to 55C (32F to 131F) Storage temperature -20C to 70C (-4F to 158F) Supported Operating System Humidity 5 to 95%, non-condensing Windows 7/8 x64/x86, Linux Power requirements +5 V 1.3 A typical +5 V 1.2 A typical +5 V 1.2 A typical (PXI/DAQ-2204) (PXI/DAQ-2205) (PXI/DAQ-2206) Driver and SDK +3.3 V 0.9 A, +12 V 0.564 A +3.3 V 0.81 A, +12 V 0.568 A +3.3 V 0.756 A, +12 V 0.584 A typical (DAQe-2204) typical (DAQe-2205) typical (DAQe-2206) LabVIEW, MATLAB, C/C++, Visual Basic, Visual Studio.NET Terminal Boards & Cables Software Utility DIN-68S-01 ACL-SSI-2/3/4 AD-Logger * For more information on mating terminal board and cables, please ACL-10568-1 refer to P3-48/49. 3-23 www.adlinktech.com Updated September 23, 2014. 2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Data Logging & Acquisition category: Click to view products by ADLINK Technology manufacturer: Other Similar products are found below : PCI-6208A DAQe-2502 PXI-2208 ACL-8112DG SpotBotBLE LPCI-7230 USB-4761-BE SE028 PCI-1761-BE AR207/8/S1/PPPP/IP65 PCI-1711UL-CE USB-4702-AE USB-4704-AE USB-4716-AE USB-4750-BE USB-4751-AE PCIE-1810-AE PCI-1710U-DE PCI- 1710HGU-DE AR207/8/S1/PPPP/IP30 U2781A 4610 EL-USB-5 AR407/S1/P/P/P/P AR207/8/S2/PPPP/IP30 ACL-8112PG cPCI-7248 cPCI-7433 DAQ-2213 ND-6053 ND-6060 PCI-7230 PCI-7432 PCI-9111DG PCI-9112 PCI-9112A PCI-9113A PCI-9221 PCM-7248+ USB-1903 USB-2401 PCIE-1813-AE PCIE-1816-AE PCIE-1816H-AE PCIE-1884-AE USB-5856-AE USB-5862-AE AR654/S2/P/P/P/P/IP30 DAS30 DAS60