High-Performance DAQ PXI/DAQ/DAQe-2208 96-CH 12-Bit 3 MS/s Ultra High-Density Analog Input Cards Ordering Information / Quick Selection Guide Model Name Analog Input Analog Output DIO Timer/Counter No. of Sampling No. of Resolution Input range Resolution Update rate No. of channels No. of channels rate channels channels PXI/DAQ/DAQe-2208 48 DI/96 SE 12 Bit 3 MS/s 0.05 V to 10 V - - - 24-Bit 8255 PIO - PXI-2208 Specifications Model Name PXI/DAQ/DAQe-2208 Analog Input Resolution 12 Bit, no missing codes Number of channels 96 single-ended or 48 differential Channel gain queue size 1024 Maximum sampling rate 3 MS/s Programmable gain 1, 2, 4, 5, 8, 10, 20, 40, 50, 200 DAQ-2208 Bipolar input ranges 10 V, 5 V, 2.5 V, 2 V, 1.25 V, 1 V, 0.5 V, 0.25 V, 0.2 V, 0.05 V Unipolar input ranges 0-10 V, 0-5 V, 0-4 V, 0-2.5 V, 0-1 V, 0-0.5 V, 0-0.4 V, 0-0.1 V Offset error 2 mV Gain error 0.06% of FSR Input Coupling DC Overvoltage protection Power on: Continuous 30 V, Power off: Continuous 15 V Input Impedance 1 G/100 pF Trigger sources Software, external digital/analog trigger, SSI bus Trigger modes Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger FIFO buffer size 1 k samples DAQe-2208 Data Transfers Polling, scatter-gather DMA Digital I/O Number of channels 24-CH 8255 programmable input/output Compatibility 5 V/TTL Data transfers Programmed I/O General Specifications Features Auto Calibration Yes (+5 V, 2 ppm/C) Supports a 32-Bit 3.3 V or 5 V PCI bus (DAQ-2208) Dimensions 160 mm x 100 mm (not including connectors) (PXI-2208) x1 lane PCI Express Interface (DAQe-2208) 175 mm x 107 mm (not including connectors) (DAQ-2208) 168 mm x 107 mm (not including connectors) (DAQe-2208) PXI Specification Rev. 2.2 compliant (PXI-2208) Connector 68-pin VHDCI female x 2 96-CH single-ended or 48-CH differential analog inputs Operating temperature 0C to 55C (32F to 131F) Onboard 1 k-sample A/D FIFO Storage temperature -20C to 70C (-4F to 158F) Bipolar or unipolar analog input ranges Humidity 5 to 95%, non-condensing Power requirements +5 V 0.95 A typical (PXI/DAQ-2208) Programmable gains of x1, x2, x4, x5, x8, x10, x20, x40, +3.3 V 0.81 A, +12 V 0.568 A typical (DAQe-2208) x50, x200 1024-configuration channel gain queue Scatter-gather DMA for analog inputs 24-CH TTL digital input/output Terminal Boards & Cables Analog and digital triggering DIN-68S-01 Fully auto calibration ACL-10568-1 Multiple cards synchronization through SSI (System Synchronization Interface) bus or PXI trigger bus ACL-SSI-2/3/4 Supported Operating System * For more information on mating terminal board and cables, please refer to P3-48/49. Windows 7/8 x64/x86, Linux Driver and SDK LabVIEW, MATLAB, C/C++, Visual Basic, Visual Studio.NET Software Utility AD-Logger 3-22 Updated September 23, 2014. 2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. www.adlinktech.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Data Logging & Acquisition category: Click to view products by ADLINK Technology manufacturer: Other Similar products are found below : PCI-6208A DAQe-2502 PXI-2208 ACL-8112DG SpotBotBLE MCM-204 USB-4711A-BE ACL-7130 LPCI-7230 PXES-2780 Rack-Mount kit USB-4761-BE SE028 PCI-1761-BE PCI-1711UL-CE USB-4702-AE USB-4704-AE USB-4716-AE USB-4750-BE USB-4751-AE USB-4751L-AE PCI-1710UL-DE PCI-1710U-DE PCI-1710HGU-DE AR207/8/S1/PPPP/IP30 U2781A 4610 AR407/S1/P/P/P/P AR207/8/S2/PPPP/IP30 ACL-8112PG cPCI-7248 cPCI-7433 DAQ-2213 DAQe-2205 ND-6053 ND-6060 PCI-7230 PCI-7432 PCI-7442 PCI-9112 PCI-9112A PCI-9113A PCI-9221 PCM-7248+ USB-1903 USB-2401 PCIE-1813-AE USB-5860-AE USB-5862-AE AR654/S1/P/P/P/P/IP30 AR654/S2/P/P/P/P/IP30