USB-1210 ADLINK Technology

USB-1210 4-CH 16-Bit 2MS/s Simultaneous-Sampling USB DAQ Module Features USB 2.0 Hi-speed USB bus power 500VDC Isolation 256M samples FIFO 4-CH simultaneous-sampling analog input, up to 2MS/s per channel Analog and digital triggering Removable screw terminals on module Lockable USB cable for secure connectivity Analog and digital triggering Ready-to-use testing application (U-Test) provided Introduction Supported Operating System The USB-1210 is a 16-bit high-speed USB 2.0-based DAQ module Windows 10/7 equipped with 4 analog input channels providing simultaneous Linux sampling at up to 2MS/s per channel. The USB-1210 delivers high accuracy and excellent dynamic performance at maximum sampling Driver and SDK rates, and flexible trigger functions. In addition, onboard 256M samples FIFO ensures no data loss during acquisition even when MAPS Core, LabVIEW, MATLAB, C/C++, Visual Basic, Visual CPU or system loading is heavy. Studio.NET The USB-1210 is USB bus-powered and equipped with removable screw-down terminals for easy device connectivity. The attached Software Utility multifunctional stand can be used for desktop, rail, or wall mounting. U-Test Suitable for high-speed data acquisition, laboratory and medical research, the USB-1210 provides a reliable measurement solution at an affordable price. Ordering Information USB-1210 4-CH 16-Bit 2MS/s Simultaneous-Sampling Analog Input USB Module Optional Accessories RST-20P One pair of 20-pin removable screw terminals USB-2M-L 2 M USB Type A to USB Mini-B cable with lockable connector Standard Shipped Accessories One pair 20-pin removable screw terminals 2 M USB Type A to USB Mini-B cable with lockable connector Module stand Rail-mount kitSpecifications Model Name USB-1210 Analog Input Resolution 16-Bit Number of channels 4 differential (simultaneous-sampling) Maximum sampling rate 2MS/s per channel Programmable gain 1, 5 Input range (Voltage) 10 V, 2 V 1mV (gain=1) Offset error 0.2mV (gain=5) Typical: 0.01% of FSR (gain=1 & 5) Gain error Maximum: 0.02% of FSR (gain=1 & 5) -3dB Bandwidth 600 kHz 80 dB (gain=1) CMRR (fin=1 kHz) 90 dB (gain=5) SFDR (fin=10 kHz) 98 dB (gain=1 & 5) SINAD (fin=10 kHz) 89 dB (gain=1 & 5) THD (fin=10 kHz) -100 dB (gain=1 & 5) SNR (fin=10 kHz) 89 dB (gain=1 & 5) ENOB (fin=10 kHz) 14.3-bit (gain=1 & 5) FIFO buffer size 256M Samples Trigger sources Software, external digital, analog trigger ( from one analog input channel) Trigger mode Post trigger, pre-trigger, delay trigger, middle trigger, gate trigger, post or delay trigger with re-trigger External A/D conversion Yes (from CONV) source Input coupling DC Power on: 35 V Overvoltage protection Power off: 15V Input impedance 1 G Data transfer Programmed I/O, continuous (USB bulk transfer mode) Function I/O Mode* Digital I/O, general timer/counter, pulse generation Digital I/O 8 DI / 4 DO (TTLLVTTL level) General timer/counter Two 32-bit, base clock: 80 MHz, external to 10 MHz Pulse generation Two PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz duty cycle: 1%-99%) General Specifications Interface USB 2.0 high speed I/O connector Two 20-pin removable screw terminals Operating temperature 0 to 55C (32 to 131F) Storage temperature -20 to 70C (-4 to 158F) Relative humidity 5 to 95% non-condensing Power requirements 5V 500 mA (USB bus powered) requirements 114 mm (H) x 156.5 mm (L) x 41.3 mm (W) (4.5 x 6.16 x 1.63) (without connector and stand) Note: As function I/Os share the same I/O pins, only one of these modes can be selected.