DIY COLD PLATES ATS-CP-1001-DIY The DIY family of high-performance IGBT cold plates provides engineers with the freedom to drill holes to match the specific connection points of the electronic devices that *Image for illustration purposes only are being cooled. Each cold plate has an etched no drill zone to provide a visual guide. On the outside of the no drill zone, through holes can be ATS COLD PLATES drilled at any point. (Avoid drilling into the I/O ports.) Inside Inno vative Technology DIMENSIONS (L X W X H) Superior heat transfer, the no drill zone holes can only be drilled to a depth of 6 202 X 130 X 20 mm flexible design platform (7.9 X 5.1 X 0.8) mm to avoid damaging the internal fin field. (See drawing on Compact Design INLET/OUTPUT PORTS page 2.) 1/4 18 NPT Designed to fit standard IGBT and other power MATERIAL The ATS-CP-1001-DIY cold plate, at a flow rate of 4 L/min, electronics applications ALUMINUM 6061-T6 can transfer 1kW of heat at 5.0C temperature difference Easy Connections WEIGHT between the cold plate base and inlet fluid temperature. Industry standard threaded 1,340g hole sizes allows for hassel-free FEATURES AND BENEFITS connection options More than 30% improvement in Provides uniform cold plate Safe & Reliable thermal performance compared to surface temperature when Leak Free (100% tested:100 psi) commercially IGBTs are installed Custom Options available cold plates Provides same performance Choose from various options, i.e Compatible with industry as standard ATS cold plates, fitting types, material types, device accepted coolants but without pre-drilled holes mounting and more. Contact ATS 1/4 NPT threaded input and Lightweight for ease of for additional information output transportation Low pressure drop Maximum pressure: 60 psi Customization Available ATS will customize any of the cold plates to fit into your application APPLICATIONS Flow Meter Leak Detector Automotive Industry, Uninter- ruptible Power Supplies, Wind Turbines, Photovoltaic Inverters, Power Electronics, Induction Heaters, Motor Devices, Utility Vehicles, Anywhere power Cold Plates Chillers Heat Exchangers devices are used ATS has the products needed to design a complete liquid cooling loop: Cold Plates to transfer and remove the heat from the source, Heat Exchangers to transfer heat from the liquid to the air with or without a fan, and Chillers to circulate and condition the fluid in the system. In addition, ATS offers Flow Meters to instantaneously measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. R2 0619 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA T: 781.769. 2800 ATS-HQ QATS.COM WWW.QATS.COM DIY COLD PLATES ATS-CP-1001-DIY PERFORMANCE CURVES ATS Cold Plate Family Dimensions* Flow Rate T Part Number (L x W x H) (L/min) 1kW ATS-CP-1000-DIY 202 x 130 x 20 4 L/min 5.50C ATS-CP-1001-DIY 198 x 147 x 20 4 L/min 5.00C ATS-CP-1002-DIY 162 x 136 x20 4 L/min 7.00C ATS-CP-1003-DIY 162 x 147 x 20 4 L/min 6.80C ATS-CP-1004-DIY 162 x 172 x 20 4 L/min 5.90C Flow rate R (C/W) DeltaP (psi) (gallon/min)** 2 0.0054 2.2 1 0.0062 0.87 0.5 0.0083 0.35 0.2 0.016 0.1 * All Dimensions in mm ** Note: To convert to l/min, multiply by 3.7 MECHANICAL SPECIFICATIONS (all dimensions in mm) For further technical information, please contact Advanced Thermal Solutions, Inc. by phone: 1-781-769-2800, email ats-hq qats.com or visit www.qats.com. 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA T: 781.769. 2800 ATS-HQ QATS.COM WWW.QATS.COM R2 0619