THERMOCHROMIC LIQUID CRYSTAL KIT FEATURES: TLC-100-DIST Comprehensive Kit Everything required for THERMOCHROMIC LIQUID CRYSTAL KIT thermal mapping, right out of the box (does not include The TLC-100-DIST is a Thermochromic Liquid compressed gas) Crystal Kit designed for heat transfer studies Two Temperature Ranges and mapping temperature fields on electronic Comes with TLC 5 components or boards. The TLC-100-DIST (40C to 60C) and features thermochromic liquid crystals (TLCs) TLC 12 (80C to 90C) which change color at a specified temperature starting at red, changing to green then blue. For Versatile Can be used for electronics cooling applications, this provides measurements at both the the user accurate information about the location component and board-level of hot spots on a device, their temperature and temperature gradient. The temperature map of the component is shown APPLICATIONS: after being sprayed with liquid crystals. Heat Mapping Studies Component T emperature Testing To map the temperature profile of a component or board, black ink is airbrushed on to the PCB T esting specimen. Then, TLCs with a particular temperature range (depending on the application), are Hot Spot & Def ect Identification sprayed onto the measurement surface. Once the device is turned on and the components are brought to activation temperature, the liquid crystals will begin turning red, then into different colors, representing the temperature distribution of the component or board. Black ink and TLCs are non-destructive and wash off with the aid of soap and water . o o o The TLC-100-DIST kit comes with two TLC temperature ranges - 40 C to 60 C and 80 C o to 90 C. More temperature ranges are available from ATS by visiting www.qats.com. The kit comes with everything needed for thermal mapping, with the exception of a compressed gas TLC-100-DIST Kit source. The airbrush can be used with an air compressor or an airbrush propellant product (Passche N-12 Pressure Can or equivalent). KIT COMPONENTS: An airbrush for coating the component ATS SURFACE THERMOGRAPHY SYSTEMS FOR TEMPERATURE MAPPING STUDIES or boards surface with black backing ink and liquid crystals. Air hose with couplings, valve for propellant cans and a 1/4 pipe adapter for use with an air compressor Two 30 ml bottles of Thermochromic Liquid Crystals (TLC 5 and TLC 12). One 30 ml bottle of sprayable black backing ink for pre-treating tvLYT thermVIEW ethermVIEW the surface to be studied. Two glass jars, which attach to the For further technical information, contact Advanced airbrush, for dispensing ink and liquid crystals. Thermal Solutions, Inc. at 781-769-2800 or ats-hq qats.com. 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA T: 781.769. 2800 ATS-HQ QATS.COM WWW.QATS.COM R1 1020X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Thermal Interface Products category: Click to view products by Advanced Thermal Solutions manufacturer: Other Similar products are found below : 7721-9PPS FGN80-2 PFM-172-60 A-40 174-9-230P 9601-7 5300AC 1.500G 08133 V6622C TVQF-1225-07S TP0001 4860 SC80-W2 V6516C A17713-06 A17713-05 A17690-06 A17775-03 A17690-05 A17690-03 A17653-02 A17689-02 A17690-04 A17775-05 A17775- 06 A17690-08 A17690-02 A17689-06 A17653-06 A17690-12 A17653-03 A17536-02 A17689-03 A17536-10 A17752-13 A17752-04 A17752-07 A17634-12 19-36565-0001-1 A17752-09 22000-001A A17752-20 A17752-16 A17752-12 A17653-04 A17634-10 A17634-09 A17634-07 A17633-20 A17633-07