1300 2.5-Inch and M.2 NAND Flash SSD Features 1300 2.5-Inch and M.2 SATA NAND Flash SSD MTFDDAK256TDL, MTFDDAK512TDL, MTFDDAK1T0TDL, MTFDDAK2T0TDL, MTFDDAV256TDL, MTFDDAV512TDL, MTFDDAV1T0TDL Reliability Features 3 MTTF: 1.5 million device hours Micron 3D TLC NAND Flash Static and dynamic wear leveling RoHS-compliant package Uncorrectable bit error rate (UBER): <1 sector 15 SATA 6 Gb/s interface per 10 bits read TCG/Opal 2.0-compliant self-encrypting drive Low power consumption (SED) Device sleep numbers: <10mW 4 Compatible with Microsoft eDrive DIPM numbers: 55mW TYP Hardware-based AES-256 encryption engine Endurance: Total bytes written (TBW) ATA modes supported Up to 400TB 5 PIO mode 3, 4 Capacity (unformatted): 256GB, 512GB, 1024GB, Multiword DMA mode 0, 1, 2 2048GB Ultra DMA mode 0, 1, 2, 3, 4, 5, 6 Mechanical Industry-standard, 512-byte sector size support 2.5-inch 7mm form factor Hot-plug/hot-remove capable (2.5 ) M.2 Type 2280 form factor Device sleep (DEVSLP), extreme low-power mode Secure firmware update with digitally signed firm- Native command queuing support with 32-com- ware image mand slot support Operating temperature 6 ATA-8 ACS4 command set compliant Commercial (0C to +70C) ATA security feature command set and password login support 1. Typical I/O performance numbers as meas- Notes: Secure erase (data page) command set: fast and se- ured fresh-out-of-the-box (FOB) with a queue depth of 32 and write cache ena- cure erase bled. Sanitize device feature set support 2. 4KB transfers QD = 1 used for READ/WRITE Self-monitoring, analysis, and reporting technology latency values. (SMART) command set 3. The product achieves a mean time to failure Dynamic write acceleration (MTTF) based on population statistics not Adaptive thermal monitoring relevant to individual units. Power loss protection for data-at-rest 1, 2 4. Active average power measured during exe- Performance cution of MobileMark with DIPM (device- PCMark Vantage (HDD test suite score): Up to initiated power management) enabled. 84,000 5. 1GB = 1,000,000,000 bytes Sequential 128KB READ: Up to 530 MB/s 6. As reported by SMART. Sequential 128KB WRITE: Up to 520 MB/s Random 4KB READ: Up to 90,000 IOPS Warranty: Contact your Micron sales representative Random 4KB WRITE: Up to 87,000 IOPS for further information regarding the product, READ/WRITE latency: 85s/40s (TYP) including product warranties. CCM005-731836775-10532 Micron Technology, Inc. reserves the right to change products or specifications without notice. 1 1300 ssd.pdf - Rev. A 9/18 EN 2018 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice.1300 2.5-Inch and M.2 NAND Flash SSD Features Part Numbering Information Microns 1300 SSD is available in different configurations and densities. The chart below is a comprehensive list of options for the 1300 series devices not all options listed can be combined to define an offered product. Visit www.micron.com for a list of valid part numbers. Figure 1: Part Number Chart MT FD D AK 256 T DL- 1 AW 1 2 AB YY ES Production Status Micron Technology Blank = Production ES = Engineering sample Product Family FD = Flash drive Customer Designator Drive Interface YY = Standard D = SATA 6.0 Gb/s Feature Set Drive Form Factor AB = Standard AK = 2.5-inch (7mm) TA = TAA Compliant AV = M.2 (80mm x 22mm) ZZ = Blank Extended Firmware Features Drive Density Z = Non-Encrypted 256 = 256GB 2 = SED (self-encrypting drive) 512 = 512GB 1T0 = 1024GB Sector Size 2T0 = 2048GB 1 = 512 byte NAND Flash Type NAND Flash Component T = TLC AW = 512Gb, TLC, x8, 3.3V BOM Revision Product Family For example: DL = 1300 1 = 1st generation 2 = 2nd generation CCM005-731836775-10532 Micron Technology, Inc. reserves the right to change products or specifications without notice. 2 1300 ssd.pdf - Rev. A 9/18 EN 2018 Micron Technology, Inc. All rights reserved.