4-slot Distributed DA&C System for ADAM-5000/485 RS-485 8-slot Distributed DA&C System for ADAM-5000E RS-485 Features RS-485 communication for easy installation and networking 4 or 8 slots for up to 128 points data monitoring card control in one module Extensive software support, includes windows DLL drivers, OCX drivers, OPC server and popular HMI/SCADA software drivers Seamlessly integrated with easy-to-use ADAMView data acquisition software Supports ADAM ASCII protocol or Modbus /RTU protocol Supports Modbus/RTU protocol with user-defined Modbus address RoHS COMPLIANT 2002/95/EC Introduction The ADAM-5000/485 and ADAM-5000E systems conform to the EIA RS-485 communication standard. This is the industry s most widely used, balanced, bidirectional transmission line standard. RS-485 was specifically developed for industrial applications to transmit and receive data at high rates over long distances. Specifications Control System Protection CPU 16-bit 80188 microprocessor Communication Line 2,500 VDC (ADAM-5000/485) Isolation 3,000 V (ADAM-5000E) DC I/O Slots ADAM-5000/485: 4 ADAM-5000E: 8 I/O Module Isolation 3,000 V DC LED Indicators Power, CPU, communications Transient Protection RS-485 communication lines, power input Watchdog Timer 1.6 sec. (System) Power Reversal Yes Protection Communications General Command Format ASCII command/response protocol, Modbus/RTU Certification CE, FM Communication RS-485: 1.2 km (4000 feet) Distance Connectors 1 x DB9-M/DB9-F/screw terminal for RS-485 (communication) Data Format Asynchronous. 1 start bit, 8 data bits, 1 stop bit, no 1 x DB9-F for RS-232 (configuration) parity 1 x Screw-terminal for power input Network Protocols Programming link: RS-232 (3-wire: TX, RX, GND) Dimensions (WxHxD) 4-slot: 231 x 110 x 75 mm Communication: RS-485 (2-wire) 8-slot: 355 x 110 x 75 mm Reliability Check Communication error checking with checksum Enclosure ABS+PC Max. Nodes 128 (in RS-485 daisy-chain network) Mounting DIN-rail, wall, rack (with mounting kit) Speeds (kbps) 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, and 115.2 Environment Power Humidity 5 ~ 95%, non-condensing Power Consumption 3 W 24 V (ADAM-5000/485) DC (not including I/O modules) Operating Temperature -10 ~ 70C (14 ~ 158F) 4.0 W 24 V (ADAM-5000E) DC Storing Temperature -25 ~ 85C (-13 ~ 185F) (not including I/O modules) Power Input Unregulated 10 ~ 30 V DC Ordering Information Software ADAM-5000/485 4-slot Distributed DA & C System for RS-485 Driver Support Windows DLL, OPC Server, Wonderware InTouch, ADAM-5000E 8-slot Distributed DA & C System for RS-485 Intellution, iFIX, Citect, Advantech Studio, ADAMView C and .NET Class Library Remote DA&C Systems: ADAM-5000 All product specifications are subject to change without notice. Last updated: 27-Jun-2018X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Interface Modules category: Click to view products by Advantech manufacturer: Other Similar products are found below : IFD8520 cPCI-3544 422CON ATX6022/14GP7 ATX6022/8 AX93221-24/48 FC6A-EXM2 OPT8AP-AE 96RMKVM-19V1C-A 60016- 011 60016-014 60006-008 60011-075 HPCI-14S12U cBP-3208 cBP-3062A FAB205-6P5 ATX6022/6 60016-012 96RMKVM-17V1C-A PCE-DP10-00A1E MOS-1120Y-0201E 96RMLCD-17V1-A 96RMKVM-17V8C-A 60004-005 60016-017 60006-009 60016-035 60016- 034 60016-031 60016-030 60016-026 60016-024 60016-018 60016-007 60016-005 60007-002 60006-010 AXX10GBTWLHW3 382- BBEH 555-BDCL K6CMISZBI52 426451401-3 60011-093 MIC-3620/3-BE MPCIE-UART-KIT02-R20 RSM232 PCIE-1680-AE BB- FOSTCDRI 73-544-002