Ethernet to FiberOptic Converters
ADAM-6541 Series
Features
Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
Provides 1 x 100 Mbps multi/single-mode fiber optic port
Supports full/half duplex flow control and internal jumper for setting
Supports store and forward transmission
Supports auto-negotiation
Supports MDI/MDI-X auto crossover
Provides surge protection (EFT) 3,000 V for power line
DC
Provides 4,000 VDC Ethernet ESD protection
Supports +10 ~ 30 V power input
DC
Provides flexible mounting : DIN-rail, Panel Mounting, Piggy-back
Supports operating temperature from 0 ~ 60C
ADAM-6541/ST
Introduction
ADAM-6541 is designed to convert Ethernet networks to fiber networks. It does so by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide
bandwidth, EMI immunity and long-distance transmission capability. Therefore, ADAM-6541 is an ideal solution for fiber to building applications at central offices or local sites.
ADAM-6541 supports MDI/MDIX auto detection, so you dont need to use crossover wires. It also includes a switch controller that can sense the transmission speed (10/100 Mbps)
automatically.Both the Ethernet port and the fiber port have memory buffers that support store-and-forward mechanisms. This assures data can be transmitted properly.
ADAM-6541 is extremely compact and can be mounted in three different ways: DIN-rail, Wall and Stack. ADAM-6541 can work normally from 0 ~ 60C and accepts a wide voltage
range from +10 ~ 30 V . Besides, it also provides 3,000 V surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments.
DC DC
Specifications
Communications
Environment
Standard IEEE 802.3, 802.3u, 802.3x
Operating Temperature 0 ~ 60C (32 ~ 140F)
LAN 10/100Base-TX, 100Base-FX
Stack: 0 ~ 55C (32 ~ 131F)
Transmission Distance
Storage Temperature - 10 ~ 70C (-14 ~ 158F)
Ethernet : Up to 100 m
Operating Humidity 20 ~ 95% (non-condensing)
Fiber: Multi-mode : Up to 2 km
Storage Humidity 0 ~ 95% (non-condensing)
Single-mode : Up to 20 km
MTBF 550,000 hrs
Transmission Speed Up to 100 Mbps
Certification
Interface
Safety UL 60950-1, CAN/CSA-C22.2 No.60950
Connectors 1 x RJ-45
EMC U.S.A.: FCC Part 15 CISPR 22
1 x SC type fiber connector (ADAM-6541) or 1 x ST
type fiber connector (ADAM-6541/ST) EU: EN55011, EN61000-6-4
2-pin removable screw terminal (power)
EN55022 Class A,
LED Indicators ADAM-6541, ADAM-6541/ST : Power, Full/Link
EN61000-3-2/3
(100BASE-FX), 100/10M (Ethernet)
EN55024,
IEC61000-4-2/3/4/5/6/8/11
Power
EN61000-6-2
Power Consumption ADAM-6541, ADAM-6541/ST : Max. 3W
Power Input 1 x Unregulated 10 ~ 30 VDC
Mechanism
Dimensions (W x H x D) 70 x 112 x 27 mm
Enclosure IP30, ABS+PC with solid mounting kits
Mounting DIN 35 rail, Wall, Stack
Protection
ESD (Ethernet) 4,000 V
DC
Isolation (Ethernet) 1,500 Vrms Ordering Information
Surge (EFT for power) 3,000 V
DC
ADAM-6541 Ethernet to Multi-mode SC Type Fiber Optic Converter
ADAM-6541/ST Ethernet to Multi-mode ST Type Fiber Optic Converter
Programmable Automation Controllers
All product specifications are subject to change without notice Date updated: 26-Jun-2014X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Ethernet Modules category:
Click to view products by Advantech manufacturer:
Other Similar products are found below :
1026937 1026932 M38510/00302BCA 70001610 70001634 850-15633 PD-AS-951/12-24 GX-OC1601 1402407 I210T1 I350T4V2
SBL2EX SL170115 GX-OD1612 CPTS-4R4E-R TDKEZW3 I350F2 I350F2BLK I350T2V2 V23993-USB1029A 100-POE4 105FX-ST
105TX-SL SEG305-T 70001992 70001993 708TX 854-19720 I350T4V2BLK I350T2V2BLK I210T1BLK PD-OUT/MBK/S SX-BR-
4600WAN2-US W4S105C X710DA4FHBLK I350T2V2BLK 936714 GX-ID1611 3G8F7-DRM21-E EKI-2525I-BE
BCM53426A0KFSBG PCM-24R2GL-AE 96NIC-1G4P-PE-IN2 0.70001777 BCM53402A0KFSBG 105FXE-SC-15-POE PD-OUT/MBK/G
856-15410 X520QDA1 BCM84794A1KFSBG X520DA2OCP