Wzzard Mesh Wireless Sensors for Industrial Applications BB-WSD2x series www.advantech.com PRODUCT FEATURES + Ultra-low power 802.15.4e SmartMesh IP technology + Communicates with SmartSwarm-342 gateway via scalable and reliable wireless mesh networks + Connect to most any industry standard sensors + Rugged, IP67 rated, fiber reinforced polyester PBT enclosure + MQTT and JSON IoT protocol to application platform + Sensor interface cable and antenna included + UL Listed C1/D2 for hazardous locations (conduit models only) SPECIFICATIONS Wireless Connectivity Where You Need It POWER The Wzzard intelligent wireless sensor platform creates a complete, quick and easy connectivity stack between your sensors and application on your Internal (2) 3.6V 2400 mAH Lithium Thionyl Chloride AA Batteries network or the Internet. The platform uses Wzzard mesh sensor edge nodes Battery Life >5 years based on 1 min. sensor sampling and reporting and a wireless 802.15.4e SmartMesh IP network to transmit sensor data to Optional External 10-30 VDC 40mA peak a SmartSwarm Gateway. The gateway can connect to the Internet via wired Input Voltage connections or cellular data networks and communicate with application SENSOR POWER OUT Switched Vbat Battery Power Turned on at time of measurement (20 mA max) platforms using the MQTT IoT protocol and JSON data formats. Switched Vref 3.3V (+/- 0.1%) Turned on at time of measurement (20 mA max) MECHANICAL Wzzard mesh wireless sensor nodes can accommodate virtually any Conduit (UL Type 3 outdoor approved): 12.7mm (0.5 in) industry-standard external sensors. Connections can be made via M12 - includes (1) one sensor interface cable - 8-pin 26-gauge wire connector or conduit fitting. The nodes provide a wide variety of sensor Connection Options harness, 1.8 m (6 ft) (Model BB-WSCACO-6) interface options, including general purpose analog input, digital input/output M12 connector (Not UL rated for outdoor installations.) and thermocouple. All nodes contain an internal temperature sensor. Analog Input (0 -10 VDC, 0 - 20 mA, 4 - 20 mA) Digital Input (0 - 48 VDC) Secure, Reliable and Highly Scalable Wireless Networking Digital Input Frequency 1-1K Hz (accuracy +/- 1 Hz) The 802.15.4e Wzzard platform uses mesh networking and time- Sensors Digital Input Counter synchronized channel hopping to provide up to 99.999% connectivity, even Integrated Temperature in the most demanding RF environments. New nodes may be added at any Thermocouple (J, K, N, R, S, T, B, E) time and the SmartMesh IP network will dynamically self-configure as new Digital Output, Sinking, up to 100mA 30VDC nodes are added or removed. RP-SMA, Omni-directional, 3.8 dBi, 2.4 GHz (included) External Antenna (included) Dimensions: 194 mm (7.64 in) Easy Configuration and Installation (4) Mounting Ears, M5 ( 10) screws (UL approved option) Configuration of the Wzzard sensor platform is easy via the SmartSwarm Magnetic Mounting (via internal enclosure magnet) Mounting Options Pull Force 2.13 kg (4.7 lb) Gateway. Nodes can be configured with scaling information, eng. units, Note: Magnetic mounting (all models) not rated for UL installations. friendly names, geo-location and other descriptive information. Enclosure IP67 rated fiber reinforced polyester PBT Weight 0.34 kg (0.75 lb) The platform simplifies physical installation, too. Nodes can be attached to TECHNOLOGY any surface via mounting ear flanges and screws or the embedded magnetic Wireless 802.15.4e, SmartMesh IP base. Magnetic mount is convenient for RF link location determination or Protocols MQTT, JSON other purposes. (Permanent use of the magnetic mount is not approved for LED Network Connectivity UL installations.) The IP67 rated, fiber reinforced polyester PBT housing ENVIRONMENTAL makes the units deployable in any industrial or commercial environment. Indoor/Outdoor Installation Note: M12 models are rated for outdoor use (except in UL installations). Intelligence at the Network Edge Operating Temperature -40 to +80 C (-40 to +176 F) The Wzzard wireless platform places intelligence at the network edge. The Storage Temperature -40 to +85 C (-40 to +185 F) Wzzard mesh wireless sensor nodes can be configured to communicate data Operating Humidity 0 to 95% Non-condensing only when specified threshold or alert levels are exceeded. When reporting, WIRELESS SECURITY they can associate useful information like geo-location, device name and Device Authentication uptime. This eliminates unnecessary network traffic, eases the processing 128-bit, AES-based Encryption with multiple keys burden on upstream resources and cuts the cost of cellular data plans when Message Integrity Check (MIC) the gateway is using the cellular data network. Thanks to low-power wireless Synchronized Key Changeovers technology and programmable time synchronization, the Wzzard mesh Customized Key Rotation wireless sensor nodes can operate for many years on battery power. All product specifications are subject to change without notice. BB-WSD2x WzzardIndustrialSensorNodes 4020ds Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 1 (800)346-3119/Toll Free orders advantech-bb.com support advantech-bb.comWzzard Mesh Wireless Sensors for Industrial Applications BB-WSD2x series ORDERING INFORMATION MODEL NUMBER DESCRIPTION CONNECTOR INCLUDES UL LISTED C1/D2 2 Analog Inputs, 1 Digital Input, 1 Digital Output, 2 Thermocouples, Indoor / Outdoor, BB-WSD2C21150 Industrial Cooler/HVAC Node Conduit 2 Thermistors, Internal Temperature w/ mounting ear installation BB-WSD2C06010 Industrial Digital Input Node Conduit 6 Digital Inputs, Internal Temperature (pending) Indoor / Outdoor, BB-WSD2C31010 Industrial Power Monitor Node Conduit 3 Analog Inputs, 1 Digital Input, Internal Temperature w/ mounting ear installation BB-WSD2M06010 Industrial Digital Input Node M12 6 Digital Inputs, Internal Temperature No (M12 connector not UL.) BB-WSD2M31010 Industrial Power Monitor Node M12 3 Analog Inputs, 1 Digital Input, Internal Temperature No (M12 connector not UL.) 2 Analog Inputs, Vbat measurement, 1 Digital Input, Internal Temperature, BB-WSD2M3101P2K Industrial Power Monitor Node M12 No (M12 connector not UL.) Switched Vbat Power Out (2 sec.) 2 Analog Inputs, Vref measurement, 1 Digital Input, Internal Temperature, BB-WSD2M3101R100 Industrial Power Monitor Node M12 No (M12 connector not UL.) Switched 3.3V Power Out (100 ms) - ACCESSORIES sold separately MODEL NUMBER DESCRIPTION COMPATIBLE NODES Antenna - dipole, 2.4/5 GHz, 2dBi, RPSMA, rubber duck, hinged BB-ACH2-DBAT-DP002 All Industrial Nodes (Replacement 1 included with all nodes.) BB-ZXTMT Kit - Zlinx Xtreme conduit cable gland & hub All Conduit Nodes Sensor interface cable, 8-pin 26-gauge wire harness, 1.8m (6ft) BB-WSCACO-6 All Conduit Nodes (Replacement 1 included with conduit nodes.) BB-WSCAM12-6 Cable - M12 pigtail, 8-pin, 1.8 m (6 ft) All M12 Nodes BB-JC10F50-V Sensor - 50A clamp-on AC current, 0-5VDC Out All Analog Input Nodes BB-JC24S250-V Sensor - 250A clamp-on AC current, 0-5VDC Out All Analog Input Nodes BB-JC36S500-V Sensor - 500A clamp-on AC current, 0-5VDC Out All Analog Input Nodes BB-WCD-TM2M Thermistor cable BB-WSD2C21150 BB-WTJ-10-36-TT Sensor - J-type thermocouple, 10 mounting hole, ungrounded BB-WSD2C21150 BB-HS-104T2505402 Sensor - low power vibration/temperature sensor, 250mV/g BB-WSD2M3101P2K BB-WSDCBL-ACL-2 M12 signal conditioning cable for model BB-HS-104T2505402 BB-WSD2M3101P2K BB-T9602-3-A-1-G2 Sensor cable - temperature/humidity, 1.8 m (6 ft) BB-WSD2M3101R100 MECHANICAL DIAGRAM Units = Millimeters Inches Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA (800)346-3119/Toll Free orders advantech-bb.com support advantech-bb.com