16-port+2 SFP Gigabit Ethernet EKI-5726F/FI ProView Switch Features Communicates with SCADA software via Modbus/TCP Communicates with NMS (Networking management system) via SNMP Port-based QoS for deterministic data transmission -40 ~ 75C operating temperature range (EKI-5726FI only) 12 ~ 48 V (8.4 ~ 52.8 V ) wide-range power input DC DC EMS level 3 protection for extreme outdoor environments IEEE 802.3az Energy Efficient Ethernet (EEE) Jumbo Frame Support (Up to 9,216 Bytes) Supports redundant 12 ~ 48 V power input and P-Fail relay DC Loop detection RoHS COMPLIANT 2011/65/EU Introduction The EKI-5726F/FI are the worlds first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. EKI-5726F/FI switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance. Specifications Communications Mechanism Standard IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab Dimensions (W x H x D) 74 x 120 x 84 mm LAN 10/100/1000Base-T(X), Optional 100Base-FX, Enclosure IP30, metal shell with solid mounting kits 1000Base-SX/LX/LHX/XD/ZX/EZX Mounting DIN-Rail, Wall Transmission Distance Ethernet: UP to 100 m (4-wire Cat.5e, Cat.6 RJ-45 Protection cable suggested for Gigabit port) SFP: UP to 110 km (depends on SFP) Reverse Polarity Present Transmission Speed Ethernet: 10/100/1000 Mbps Auto-Negotiation Overload Current Present Gigabit Copper: 10/100/1000 Mbps, Auto-Negotiation Gigabit Fiber: UP to 1000 Mbps Environment Operating Temperature EKI-5726F: -10~60C (14~140F) Interface EKI-5726FI: -40~75C (-40~167F) Connectors 16 x RJ45 Storage Temperature -40 ~ 85C (-40 ~ 185F) 2 x SFP ports Operating Humidity 10 ~ 95% (non-condensing) 6-pin removable screw terminal (power & relay) Storage Humidity 10 ~ 95% (non-condensing) LED Indicators P1, P2, P-Fail, Loop detection MTBF 1,962,789 hours 10/100/1000T(X): Link/Activity, Speed SFP: Link/Activity Certification Safety IEC/EN60950, UL60950, UL508, Class 1 Division 2, Switch Properties ATEX MAC Table Size 8K EMI FCC Part 15 Subpart B Class A, EN 55011/55022 Packet Buffer Size 4.1M bit Class A Switching Capacity 36 Gbps EMS EN 61000-4-2 (Level 3) Jumbo Frame 9216 bytes EN 61000-4-3 (Level 3) EN 61000-4-4 (Level 3) Power EN 61000-4-5 (Level 3) Power Consumption Max. 9.6W EN 61000-4-6 (Level 3) EN 61000-4-8 (Level 3) Power Input 12~48 VDC (8.4~52.8 VDC), redundant dual inputs Shock IEC 60068-2-27 Fault Output 1 Relay Output Freefall IEC 60068-2-32 Vibration IEC 60068-2-6 Industrial Ethernet Solutions All product specifications are subject to change without notice Last updated : 31-Mar-2015EKI-5726F EKI-5726F/FI Dimensions Unit: mm inch 33.4 35.6 1.315 1.400 84 3.307 15 0.591 30.9 12.5 9 41.2 1.622 17.8 0.701 73 2.874 93 3.661 1.215 0.492 0.354 10.9 0.429 EKI-5726F 16.4 0.644 Ordering Information EKI-5726F 16-port+2 SFP Gigabit Ethernet ProView Switch EKI-5726FI 16-port+2 SFP Gigabit Ethernet ProView Switch with Wide Operating Temperature Range Online Download www.advantech.com/products 11.1 11.7 0.439 0.461 38 1.496 47 1.850 129.8 5.110 129.8 5.110