Ultra Compact In-Vehicle Computing TREK-572 Box for Fleet Management Features Intel Atom E3815 system-on-chip (SOC) processor Can be paired with TREK-303/306 in-vehicle smart display via a single-cable connection Supports Intel IDP 3.x Moon Island Vehicle diagnostics interface with support for configurable CAN (J1939, OBD-II/ISO 15765) and J1708 (J1587) protocols Built-in GNSS, WLAN, Bluetooth, and WWAN (with a SIM card slot) modules Intelligent vehicle power management system for ignition on/off delay, wake-up event control, system health monitoring, and diagnostics functions Wide operating temperature range (-30 ~ 70 C/-22 ~ 158 F) Compliant with 12/24 V vehicle power (ISO 7637-2) MIL-STD-810G and 5M3 certified for shock and vibration tolerance Introduction TREK-572 is a compact and economical in-vehicle computing box powered by an Intel Atom E3815 SOC and can be paired with TREK-303/306 in-vehicle smart displays via a single-cable connection. Aimed at fleet management applications, TREK-572s wide operating temperature and MIL-STD-810G and 5M3 certification for shock vibration resistance enable it to withstand harsh environments. The inclusion of an intelligent vehicle power management (VPM 2.0) chip protects against transient voltage (ISO 7637-2/SAE J1455/ SAE J1113) and enables programmable functions (ignition on/off, delay on/off, and low battery monitoring). TREK-572 also features various I/O for integrating CAN bus devices and peripherals, such as a tire pressure monitoring system. The dual CAN bus ports support diverse protocols (J1939, OBD-II/ISO 15765) to facilitate vehicle diagnostics and driver behavior management. Built-in wireless communication technologies (WLAN, WWAN, Bluetooth) enable vehicle tracking and real-time data transmissions to a centralized control center. Specifications Processor Intel Atom E3815, single-core, 1.46 GHz Memory 1 x 2 GB DDR3L SODIMM 1066 MHz, non-ECC (up to 8 GB) Core Graphics Integrated 2D/3D graphics engine Operating System WES7, WES8, Win10 IoT LTSB, Linux Ubuntu 14.04 Lite (32 bit), Intel IDP 3.x Moon Island (available upon request) Storage mSATA 1 x 16 GB UMLC, SQFlash mSATA, with support system bootup 1 x 12V/2A power output for TREK-30x 1 x 18-bit LVDS with 800 x 480/1024 x 768 resolution and automatic detection 1 x Line-Out2 (for TREK-30x speakers) 1 Display Smart Display Ports 2 x UART (TX/RX, TX/RX/RTS) (for touchscreen, hot keys, and brightness/light sensor control) 1 x USB 2.0 Type A 1 x Power button 1 x Reset button 2 x CAN bus with raw CAN, J1939, and OBD-II/ISO 15765 support (configurable via firmware) Vehicle I/O 1 x J1708 with J1587 support 1 x 4-wire RS-232 (RX/TS/CTS/RTS) 1 x USB 2.0 Type A (rear side) 1 x Giga LAN with standard RJ45 connector Standard I/O I/O 2 1 x Line-Out 1 x Mic-In LED Indicators 1 x Power LED (red) Power Button Via TREK-30x in-vehicle smart display system is powered on by vehicle ignition as a default Reset Button 1 x Reset button (rear side) IEEE 802.11a/b/g/n + Bluetooth V4.0 combo module via full mini PCIe slot (optional high-power WLAN/WLAN WLAN + Bluetooth roaming available upon request) 4G (LTE, HSPA+, GSM/GPRS/EDGE, EV-DO Rev. a1, 1xRTT) Sierra Wireless MC73xx via full mini PCIe slot WWAN (default: MC7354 for US/MC7304 for EU) RF 1 x Internal mini SIM card slot 1 x u-blox MAX-7Q GPS/GLONASS module with AGPS support (optional 3-in-1 GPS/GLONASS/BeiDou module GNSS available upon request) 3 Antenna 3 x SMA-type antenna holes for GPS, Wi-Fi+Bluetooth MIMO, WWAN/LTE MIMO Input Voltage Compatible with 12/24 V vehicle power (9 ~ 32 VDC input ISO 7637-2 and SAE J1113 compliant) System power on/off/hibernate management (programmable ignition on/off delay) Power Intelligent Vehicle Power Management Supports wake-up events: Wake on Alarm (RTC) and Wake by G-sensor (iVPM 2.0) System power protection (low voltage protection for vehicle battery) System monitoring and diagnostics 1 When paired with TREK-303/306 via a single-cable connection 2 Both Line-Out interfaces share a single audio codec and the same audio stream 3 The box-side connector is RP-SMA, female (external female thread with male internal pin) All product specifications are subject to change without notice. Last updated: 28-Nov-20184.60 TREK-572 Dimensions Unit: mm 188.90 Specifications Cont. Dimensions (W x H x D) 188.9 x 63.5 x 105.9 mm (7.43 x 2.5 x 4.16 in) Mechanical Weight 1.15 kg (2.53 lb) IP Rating IP30 Vibration/Shock MIL-STD-810G EMC CE, FCC Class B Safety UL/cUL, CB Environment Vehicle Regulations SAE J1455, ISO 7637-2, SAE J1113 RF Regulations CE (R&TTE), FCC ID, PTCRB Operating Temperature -30 ~ 70 C (-22 ~ 158 F) Storage Temperature -40 C ~ 80 C (-40 ~ 176 F) System I/O Ordering Information Part Number Description Mic-In LAN TREK-572-LWB7B0E TREK-572 w/LTE(US)/GPS/WLAN/BT/WES7 TREK-572-LWB7A0E TREK-572 w/LTE(EU)/GPS/WLAN/BT/WES7 Line-Out USB Reset Button Notes: a. Win10 IoT LTSB and Linux OS images are available upon request. b. SKU for Europe will be available soon. Power LED c. TREK-572 can only output to TREK in-vehicle smart displays. If you require a display Power Input unit to serve as a driver console, please order a TREK-30x unit and connecting cable. WLAN 1 WLAN 2 GPS Antenna Packing List WWAN 1 WWAN 2 Part Number Description 1700019031 Power cable, 2 m 1700023051-01 Vehicle I/O cable 1750007724-01 3-in-1 (LTE/GPS/Wi-Fi) antenna, 3 m 1750007723-01 Wi-Fi antenna, 3 m Smart Display Port Optional Accessories Vehicle I/O Port Part Number Description TREK-303R-HA0E TREK-303 7 WVGA in-vehicle smart display TREK-306D-HA0E TREK-306DH 10.4 XVGA in-vehicle smart display 1700020007 M cable SCSI-36P(M)/SCSI-36P(M), 2 m, for TREK-303 1700020008 M cable SCSI-36P(M)/SCSI-36P(M), 5 m, for TREK-303 1700019464 A cable 1*3P-5.08/DC jack, for in-house testing Adaptor 100-240 VAC, 60W, 12 V, 5A, 96PSA-A65W19V1-1 w/o PFC FSP060-DBA, for in-house testing